MoCA Adaptors
I just got MoCA adaptors to put ethernet through the Coax... I put them on, all the lights and colors are what they are supposed to be but they are not putting out any internet through the ethernet line. Amazon.com: Hitron Bonded MoCA 2.5 Adapter (2-Pack) | 1 Gbps Ethernet, 2.5 Gbps Over existing Coax Cable | Ideal Backbone for Mesh WiFi, Streaming and Gaming | 2 HTEM4 Adapters in Kit : Electronics
Panoramic - MoCA keeps disabling
A few days ago, I installed the "ActionTec" device (see device below) to activatethe MoCa feature within the Panoramic device. After installing it, it worked like a charm,however, when I turned it on in the morning to do some work, the "cable" light indicator didn't work. When I checked the Admin page, the settings said it was connected and active, but I didn't see the lights blinking on the ActionTec device. Therefore, I played around with the settings for a few hours, and whale! it worked again, however, after a few hours, it got disabled again (darn). I called cox and support, but they merely suggested that I replace the Panoramic as it might be a firmware issue? Huh, really, - i have the latest version and they checked it saying it was good. Troublehooting Since I had erroneously purchased two "ActionTec" devices, I replaced the original one but that didn't work as well. In short, I've changing, updating and, even resetting my Panoramic settings, but still, the cable light on the "ActionTec" does not light up anymore - Note: I have moved it around different cables and have tested the cable to ensure they're active, but or some reason, still no go. I'm thinking that perhaps I purchased the "ActionTec" device for 2.g vs the 1.g, but i have no explanation why it worked intermittently. ScreenBeam (Previously Actiontec) Bonded MoCA 2.5 Network Adapter True 2.5 Gbps Ethernet Port for Ethernet Over Coax (2 Pack) – Fast Streaming, Gaming, Work/Learn from Home (Model: ECB7250K02) Does COX have a recommendation of Network Adapters that work with MoCA?
MoCA adapter doesn't work
I purchased 2 Motorola Moca adapters to get wired connection for computers in my upstairs room. At first I wanted to see if I could get it to work with only one adapter since thepanoramic modem already has moca. When that didn't work I brought out the second adapter plugged it into the modem, It worked momentarily but then the modem light startedblinking and completelylost connectionto theinternet.
MOCA automatically disables itself daily
MOCA worked perfectly since the start of our upgraded service in August until about a week ago. It then disabled itself for some reason. After reenabling it, it only disabled itself again the next day. I've reenabled it again, but I don't want to have to do this again. I want MOCA to stay enabled as long as I have service. Modem: CGM4141COX TV streaming: Xi6-A MOCA adapter: Actiontec ECB6200 Zero has changed since the start of our service. What gives?
Unable to enable MoCA on panoramic wifi modem
Hi all, I have theCGM4140COM model of panoramic modem. On thesupport page for the product, a MoCA light is mentioned, but there is no indication as to how to turn it on. It does not appear in the options on the Panoramic Wifi page. In fact the product page is the only place that I have seen MoCA officially mentioned. Any help as to how toenable MoCA connection would be greatly appreciated. Even with the pods there is a lot of latency and I am hoping that a wired connection will help with that, but I'd rather not run an ethernet cable halfway across my house. I already have an adapter for the room with my computer. Thanks in advance, Kristin
Is it possible to have two wired connections (Two Active Cable Outlets)?
When doing the self setup I first tried the cable upstairs in my office and nothing. It said something about finding the "Active cable outlet", so then I tried the one downstairs by the tv and it worked. This means my office/gaming room is now on a wifi connection. I don't want to try to run an Ethernet cable from downstairs to my office. Since there's already a Cable Outlet in my office, is it possible to have it activated and connect some kind of adapter to it so that the same service/IP address is split and shared with upstairs and downstairs? WouldMoCA Network Adapters work for this? Would I need COX to activate the upstairs outlet? P.S. I'm aware of COX wifi pods and port forwarding as other ways to improve my upstairs connection. This post is to explore options for utilizing the currently inactive cable outlet upstairs in conjunction with the downstairs cable outlet.
