Arris SB8200 Docsis 3.1 GigaBlast No Blue Lights Up or Down
Called Cox for new internet options. Told me I was grandfathered in at 150. Quoted me 300 and Giga. Call ended. I had a Netgear 3.0 modem / router combo that worked fine. I buy a 3.0 modem and a mesh router to increase my WIFI area. I try to get it calibrated only to find out I have a work order for GigaBlast speeds and my 3.0 equipment is unusable. So as a patient person I go and swap my 3.0 for a 3.1 modem costing me more money. I call to get the 3.1 calibrated by Cox and it shows all green lights 3.0, no blue lights for Arris SB8200 Docsis 3.1 GigaBlast No Blue Lights Up or Down. Speeds are 250 down and 20 up and that is before and after a modem factory reset with ONLY my laptop plugged in. Tried with a desktop as well with the same result. - Called and asked was GiagBlast and Docsis 3.1 avilable in my area and told it was - Forced to GigaBlast without request and told I can't return to my original speed - Asked me to upgrade my equipment to take advantage of GigaBlast but when equipment is installed it I only get 3.0 and low speeds - Called from 10am to Midnight and text chat too. After dealing with 6 different people and a whole day wasted I still got nowhere - Best of all I was told no work could be done while there was an "outage" in my area. One that lasted from 2pm to 7pm, and then another that started at 12am forecast to end at 6am. Anybody else have these issues and if so how were they resolved??? - Do yourself a favor and DO NOT, I repeat DO NOT engage in the text chat option from your phone. A waste of time and resources!!!! Similar situations like mine so I know I am not alone when it comes to the level of customer service andtechnical support https://forums.cox.com/forum_home/internet_forum/f/internet-forum/22627/gigablast-activation/86619#86619 https://forums.cox.com/forum_home/internet_forum/f/internet-forum/20283/issues-with-gigablast Standard Specification Compliant Docsis 3.1 Hardware Version 4 Software Version D31CM-PEREGRINE-1.1.1.0-GA-14-NOSH Connection The status listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem. Startup Procedure Procedure Status Comment Acquire Downstream Channel 957000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ DOCSIS Network Access Enabled Allowed Downstream Bonded Channels Channel ID Lock Status Modulation Frequency Power SNR/MER Corrected Uncorrectables 30 Locked QAM256 957000000 Hz 2.6 dBmV 37.3 dB 103 482 1 Locked QAM256 783000000 Hz 1.3 dBmV 37.9 dB 0 0 2 Locked QAM256 789000000 Hz 1.3 dBmV 37.9 dB 0 0 3 Locked QAM256 795000000 Hz 1.4 dBmV 37.8 dB 0 0 4 Locked QAM256 801000000 Hz 1.3 dBmV 37.9 dB 0 0 9 Locked QAM256 831000000 Hz 1.2 dBmV 37.7 dB 0 0 10 Locked QAM256 837000000 Hz 1.6 dBmV 37.8 dB 0 0 11 Locked QAM256 843000000 Hz 1.6 dBmV 37.9 dB 0 0 12 Locked QAM256 849000000 Hz 1.7 dBmV 37.8 dB 0 0 17 Locked QAM256 879000000 Hz 1.9 dBmV 37.5 dB 0 0 18 Locked QAM256 885000000 Hz 1.7 dBmV 37.3 dB 0 0 19 Locked QAM256 891000000 Hz 1.8 dBmV 37.4 dB 0 0 20 Locked QAM256 897000000 Hz 1.7 dBmV 37.3 dB 0 0 21 Locked QAM256 903000000 Hz 1.5 dBmV 37.2 dB 0 0 22 Locked QAM256 909000000 Hz 1.6 dBmV 37.1 dB 0 0 25 Locked QAM256 927000000 Hz 2.3 dBmV 37.3 dB 0 0 26 Locked QAM256 933000000 Hz 2.7 dBmV 37.4 dB 0 0 27 Locked QAM256 939000000 Hz 2.9 dBmV 37.4 dB 0 0 28 Locked QAM256 945000000 Hz 2.8 dBmV 37.3 dB 0 0 29 Locked QAM256 951000000 Hz 2.8 dBmV 37.4 dB 0 0 33 Not Locked Unknown 357000000 Hz -46.1 dBmV 0.0 dB 0 0 34 Not Locked Unknown 363000000 Hz -45.9 dBmV 0.0 dB 0 0 35 Not Locked Unknown 369000000 Hz -45.9 dBmV 0.0 dB 0 0 36 Not Locked Unknown 375000000 Hz -45.8 dBmV 0.0 dB 0 0 37 Not Locked Unknown 381000000 Hz -45.7 dBmV 0.0 dB 0 0 38 Not Locked Unknown 387000000 Hz -45.5 dBmV 0.0 dB 0 0 41 Not Locked Unknown 405000000 Hz -45.8 dBmV 0.0 dB 0 0 42 Not Locked Unknown 411000000 Hz -46.0 dBmV 0.0 dB 0 0 43 Not Locked Unknown 417000000 Hz -46.5 dBmV 0.0 dB 0 0 44 Not Locked Unknown 423000000 Hz -47.2 dBmV 0.0 dB 0 0 45 Not Locked Unknown 429000000 Hz -47.8 dBmV 0.0 dB 0 0 46 Not Locked Unknown 435000000 Hz -48.3 dBmV 0.0 dB 0 0 159 Locked Other 300000000 Hz -47.2 dBmV 0.0 dB 0 0 Upstream Bonded Channels Channel Channel ID Lock Status US Channel Type Frequency Width Power 1 1 Locked SC-QAM 16900000 Hz 6400000 Hz 40.0 dBmV 2 2 Locked SC-QAM 23500000 Hz 6400000 Hz 41.0 dBmV 3 3 Locked SC-QAM 29900000 Hz 6400000 Hz 42.0 dBmV 4 4 Locked SC-QAM 36300000 Hz 6400000 Hz 42.0 dBmV Current System Time:Tue Apr 16 01:05:19 2019
netgear c7000 firmware upgrades not pushed through???
I received an email from netgear stating security breaches and firmware patches being issued. I am running v1.01.18, since then two firmware patches have been released v1.01.23 and v1.01.28. v1.01.28 has been approved by cox via netgears website but when I call they have no knowledge of either firmware updates or how to manually push through????
not being able to access cox wifi app or browser
I have been trying to access the cox wifi app or wifi.cox.com through the browser. I want to do this so I can access my wifi settings, Including port forwarding. This is what I get when I attempt to access the website. - Please Give Us a Call Sorry, there is a bit more we need to do to get you up and running with Panoramic Wifi. Call us at 1-800-234-3993, and we will get you squared away. To be clear, I AM able to enter my CORRECT username and password after I enter it displays this message. When I attempt to log into my account on the main cox.com website and the cox app everything works fine. I have been having this problem since I moved in last July and every time I call it's either "the website is down for support" or some other excuse. Only about two weeks ago was I told that this issue has been reported by others and it would be looked into.... two weeks ago after many months. I am tired of having to reexplain my issue with customer service which is why I'm making this post. Also worth noting is that when I look at "My account" and "manage wifi" on the main cox website it shows this - It looks like you are using a modem that is not compatible with Panoramic Wifi. Panoramic Wifi is available to customers who rent an eligible gateway.Upgrade Now. But I definitely have the router that supports cox panoramic wifi because it's the same that I had before I moved here.Technicolor CGM4141is what I have now and had before. wifi.cox.com and the cox wifi app worked prior to my move. It might be worth noting that there were issues because I had canceled my last account during my move and I don't entirely understand how it was resolved, I think maybe I have a new account number now. But I have wondered if that could be a contributing factor to these issues.Did Cox call customers saying Cox will send new modems to replace the old one?
I got a call from a guy saying he is a Cox Representative and that Cox was going to send me a new modem to replace the old out dated modem. I haven't received any modem and now wonder if this was a scammer calling to gain information or to get me to say certain words over the phone to use in order to set me up for a scam. So did Cox call or not?Internet Speeds
I have Cox Gigablast (Coaxial) bundle with contour TV (7 cable boxes) and contour voice (phones work on the 1.9ghz) with the panoramic gateway but I disabled the wifi on the gateway because its signal is not good at all for my 7000 square foot home and I connected a Luxul XWR 3150 V2 AC-3100 Dual - Band router that has 4 external antennas, which I bought 2 days ago with the Cat5e cable that came with the router. On the 5ghz wifi, I only get maximum of 450 mbps, 2 feet away from the router. Shouldn't I be getting atleast 800 or 900 mbps? I understand 1000 mbps is very unlikely but I am not satisfied with 450 mbps. Cox changed the spiltters in August. I have tried the speed tests on multiple different channels and 450 mbps is the highest I've got. I've power cycled the gateway and the router and multiple speed tests. The DNS is set to Google's Public DNS. Nothing on my network is a old that would slow down my speeds. The coaxial cable is as tight and I've had others make sure the connection is tight. How can I get close to the speeds I am paying for?