iPv6

14 Topics

New Technicolor CGM4331COM Gateway for Cox / Wi-Fi 6 Gateway
I've seen a new Technicolor CGM4331COM gateway mentioned for Xfinity (link below). Does anyone know whether this hardware will also be adopted by Cox in the near future? It seems like Xfinity has already started rolling this new equipment out to customers. Or is there any other updated gateway on the horizon for Cox? To me the Cox network seems to have some serious deficiencies with IPv6. I've seen some evidence that the current CGM4141 gateway may be part of the issue (I see many "FW.IPv6 FORWARD drops" and "FW.IPv6 INPUT drops" that coincide with my spotty internet performance). Coxshould have a new gateway in the works that mitigates this. I imagine they'll need to put out something with Wi-Fi 6 by the end of 2020. While Wi-Fi 6 isn't my main interest, I'm hoping they'll use this as an opportunityto correct the issues with IPv6 and the firewall. Anyone heard anything? https://www.dslreports.com/forum/r32469291-Equip-XB7-Technicolor-CGM4331COM-Arris-TG4482-Wireless-AX-Wi-Fi-6
matt1212
5 years ago Place Internet
9.4KViews
0likes
3Comments
IPV6 at Cox for Apple Time Capsule Airport Extreme routers
Over the years sometimes IPV6 works and sometimes it does not. Lately it does not
cryellow
6 years ago Place Internet
5.9KViews
0likes
1Comment
IPv6?
i have the Cisco DPQ3212 modem, which is a docsis 3.0 modem, connecting to a Netgear AC 1750 router, model number R6700v2. I have configured the router to use IPv6, but an IPv6 test site says I am not receiving an IPv6 signal. I have gone through numerous questions on the Cox forums, and they all say that Cox is providing IPv6 service now, so I'm looking for possible problems and solutions. For example, does the modem need to be configured; does it need a firmware update; do I need a newer modem, etc? Looking for help on getting the most out of my Cox internet.
im5049
7 years ago Place Internet
3.8KViews
0likes
6Comments
Cox IPv6 San Diego
Does Cox have IPv6 rolled out in San Diego?Running https://test-ipv6.com/ on Firefox and Chrome shows No IPv6 address detected. Changed Firefox "network.dns.disableIPv6". value to "True" and can't find a way to set Chrome forIPv6 It does sayyour browser has a real working IPv6 address. The question i have has Cox rolled out IPv6, and if so,how can I get Firefox and Chrome to useIPv6. Running Cox preferred150Mbps/ 10Mbps,ARRIS / Surfboard TM3402 DOCSIS 3.1 32x8, Asus RT-AC86U.
coxcommy
6 years ago Place Internet
2.6KViews
1like
1Comment
Internet unstable
OK, so my connection for while has been super unstable. its been going on for 3 months and the problem hasn't got away. My connection would out of nowhere stop and then continue again. I've already tried to restart my modem even tho just a few days ago I upgraded to the gigablast connection and I have had cox doing troubleshoots which would fix it for a bit but it would just start all over again. Also when it disconnects it would show that IPv6 is disconnect and rarely it would also show that IPv4 is not connected. I would really like to know what's happening because I can't go on for 5 minutes without the internet just disconnecting for 2-10 seconds. My desktop is also connected via ethernet cable and the rest are wireless.
Sheep
5 years ago Place Internet
2.3KViews
0likes
1Comment
No IPv6 support on business internet account? Say what!?
I just contacted Cox business support and I was informed that Cox does NOT support IPv6 on their business internet service!? Say what now!? Can someone confirm this? I'm located in southern California. Thank you in advance.
igorek
4 years ago Place Internet
1.4KViews
0likes
4Comments
IPv6 Prefix Delegation on ONT
Hello Everyone :) I have a fiber to the home with Gigablast and have a Nokia ONT. I've been trying to receive an IPv6 prefix to be assigned to my router by requesting a /64 however to date, I have been unsuccessfull. Three years ago, Dustin/Cox stated that prefix delegation was only working under DOCSIS modems and not under PON circuits: https://forums.cox.com/discussions/internet/when-will-ipv6-work-with-fiber-to-the-home-under-gigablast/121392 Is IPv6 prefix delegation still unsupported on PON circuits or is it now supported? Thanks
h0mebas3
2 years ago Place Internet
699Views
0likes
19Comments
Settings for IPv6
Where do I get all the values I need to setup ipv6 on my TomatoUSB Router? Assigned / Routed Prefix Prefix Length Router IPv6 Address Static DNS Accept RA from WAN LAN Other ISP Config. i
Rayston
4 years ago Place Internet
644Views
0likes
0Comments
Ipv6
Ipv6 in cleveland... When will it be here New smart home accessories have a requirement for it from what ive seen on some devices.
GreenScreenDeam
6 years ago Place Internet
585Views
0likes
1Comment
Anyone else having IPv6 trouble in the Wichita area?
My router picks up the /128 for its external interface okay: FastEthernet4 [up/up] FE80::B6DE:31FF:FEA2:4BEC 2600:8803:7F11:300:54BF:ED91:45A5:7F07 ...but never receives the /56 prefix; the DHCPv6 client stays in SOLICIT: FastEthernet4 is in client mode Prefix State is SOLICIT (1) Information refresh timer expires in 23:43:58 Address State is OPEN Renew for address will be sent in 11:43:58 List of known servers: Reachable via address: FE80::EE1D:8BFF:FE08:6419 DUID: 00010001561BCA61F8BC123D6028 Preference: 0 Configuration parameters: IA NA: IA ID 0x00080001, T1 43200, T2 69120 Address: 2600:8803:7F11:300:54BF:ED91:45A5:7F07/128 preferred lifetime 86400, valid lifetime 86400 expires at Apr 21 2018 12:35 PM (85439 seconds) DNS server: 2001:578:3F::30 DNS server: 2001:578:3F:1::30 Information refresh time: 0 Prefix name: prefix-from-provider Prefix Rapid-Commit: enabled Address Rapid-Commit: enabled Prefixes sent as hint: ::/56 Anyone else seeing the like? -c
Cerebrate
7 years ago Place Internet
542Views
0likes
0Comments