KnollhavenJames
6 years agoNew Contributor
Changing downstream frequency
Hi. I have a Zoom 5354 modem/router and I would like to change the downstream frequency in an attempt to get better performance and fewer disconnections. I thought it was as easy as entering the frequency and clicking the TUNE button on the Status/Connection page, but that is not the case. Is it because Channel 1 is "locked"? How would I unlock it? Thanks in advance! J
Startup Procedure
Procedure | Status | Comment |
Acquire Downstream Channel | 729000000 Hz | Locked |
Downstream Bonded Channels
Channel | Lock Status | Modulation | Channel ID | Frequency | Power | SNR | Correctables | Uncorrectables |
1 | Locked | QAM256 | 177 | 729000000 Hz | 0.5 dBmV | 43.2 dB | 0 | 0 |
2 | Locked | QAM256 | 178 | 735000000 Hz | 2.7 dBmV | 43.9 dB | 0 | 0 |
3 | Locked | QAM256 | 179 | 741000000 Hz | 1.9 dBmV | 43.1 dB | 0 | 0 |
4 | Locked | QAM256 | 180 | 747000000 Hz | -0.3 dBmV | 43.0 dB | 0 | 0 |
5 | Locked | QAM256 | 181 | 753000000 Hz | 3.3 dBmV | 43.2 dB | 0 | 0 |
6 | Locked | QAM256 | 182 | 759000000 Hz | 4.2 dBmV | 43.9 dB | 0 | 0 |
7 | Locked | QAM256 | 183 | 765000000 Hz | 2.3 dBmV | 43.3 dB | 0 | 0 |
8 | Locked | QAM256 | 184 | 771000000 Hz | 4.2 dBmV | 43.8 dB | 0 | 0 |
Upstream Bonded Channels
Channel | Lock Status | US Channel Type | Channel ID | Symbol Rate | Frequency | Power |
1 | Locked | ATDMA | 2 | 5120 Ksym/sec | 32300000 Hz | 57.0 dBmV |
2 | Not Locked | Unknown | 0 | 0 Ksym/sec | 0 Hz | 0.0 dBmV |
3 | Not Locked | Unknown | 0 | 0 Ksym/sec | 0 Hz | 0.0 dBmV |
4 | Not Locked | Unknown | 0 | 0 Ksym/sec | 0 Hz | 0.0 dBmV |
Downstream Frequency Select | TUNE |