This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Are these signal levels bad?

Hi,

Can someone tell me if these downstream signal levels are bad, and why the event log has so many warnings and critical events?

I posted a screenshot at https://imgur.com/yyaGvfz. I have a new modem, but the signals looked the same on the old modem. I also noticed the blue downstream arrow has not stopped blinking since I connected it, except for maybe once. I contacted Cox support, but they could not see anything wrong.

The modem event log shows multiple warnings and critical events, such as:

SW upgrade Failed after download -Incompatible SW file

SW upgrade Failed after download -SW File corruption

MDD message timeout

DHCP FAILED - Request sent, No Response

REG RSP not received

Dynamic Range Window violation

No Ranging Response received - T3 time-out

SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol

DHCP WARNING - Non-critical field invalid in response

REG-RSP-MP Mismatch Between Calculated Value for p1.ghi Compared to CCAP Provided Value

TLV-11 - unrecognized OID

Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out

RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW

Thank you for any help.