Forum Discussion

ChasR's avatar
ChasR
New Contributor II
2 years ago

The connection to remote server 127.0.0.2 was refused or timed out while attempting to connect.

This has been happening often.  2 things have changed.  A Cox Panoramic Modem/Router as installed along with my wife's TP-Link wireless router.  I also installed Windows 10 a few weeks ago.  The erro...
WiderMouthOpen's avatar
WiderMouthOpen
Esteemed Contributor

If you are using your own router, do you have the Panoramic gateway in bridge mode? Also, when do you get the error, when checking Cox Webmail?

ChasR's avatar
ChasR
New Contributor II
2 years ago

2 COX service men installed the Panoramic and left NO information on it.  I have not idea what Bridge Mode is.  It occurs when I am in COX E-Mail.  After a while it clears.

  • WiderMouthOpen's avatar
    WiderMouthOpen
    Esteemed Contributor
    2 years ago

    Does it only occur on the new Windows 10 PC? Also, check your TP-Link router's internet IP address as seen here. Make sure it isn't 192.168.x.x. Not that I think double NAT is causing this problem, but might be causing others.

    • ChasR's avatar
      ChasR
      New Contributor II
      2 years ago

      192.168.0.1 apply to both the Cox and Tp-Link. Of course this confuses them and I can't get in.

      • WiderMouthOpen's avatar
        WiderMouthOpen
        Esteemed Contributor
        2 years ago

        That's a problem. You should disconnect the TP-Link from the gateway and log into the TP-Link and change it's access IP. See here on how.