Cox does not block port forwarding. I don't think there is a way with a stand alone modem. Is the port open/working when you connect direct to the S33? If so, do you have another router to try?
Also, why did you change the Linksys IP address? The modem is 192.168.100.1 so there should be no conflict with 192.168.1.1. Do you have more then one router or have a gateway connected anywhere in your network?
BTW, do you have PPTP passthrough enabled on the router? See page 29 of manual for instructions how.
Thank you for your quick message.
As soon as I switch to Arris S33 on Cox network, port forwarding stopped.
IP address on Linksys EA6400 was changed because Arris BGW210-700 had 192.168.1.254.
Yes, PPTP passthrough is enabled on Linksys EA6400, and has been working with Arris BGW210-700 on ATT network.
No change on Linksys EA6400.
Arris BGW210-700 on ATT network was changed to Arris S33 on Cox network, which is the only change.
Not saying it's your router but do you have a different router you can try? Just trying to isolate the problem. Also, did you try bypassing the router? Could be a port Cox blocks locally. Isn't on their blocked port list but I have heard of some people having problems with their local headend.
