Trying to figure out if I have a potential problem with my Netgear CMD31T modem or if there is a communication problem between the modem and Cox servers. As I expected this problem is way above the heads of Tier 1 support so I thought I'd check in here. My downstream throughput is fine (60M) and I do have upstream throughput that is within parameters (5M).
My problem is the modem upstream channel/sync lights show a problem. 1/2 is orange and 3/4 is out. When I get into the modem it shows sync and signal issues:
Connection
|
| Startup Procedure |
| Procedure |
Status |
Comment |
| Acquire Downstream Channel |
789000000 Hz |
Locked |
| Connectivity State |
OK |
Operational |
| Boot State |
OK |
Operational |
| Configuration File |
Complete |
|
| Security |
Enabled |
BPI+ |
|
|
| Downstream Channel 0 |
| Lock Status |
Locked |
Modulation |
256 QAM |
| Channel ID |
1 |
Symbol rate |
5360537 |
| Downstream Frequency |
789000000 Hz |
Downstream Power |
9.3961 dBmV |
| SNR |
37.6363 dBmV |
Correctables |
422 |
| Uncorrectables |
694 |
|
|
|
|
| Downstream Channel 1 |
| Lock Status |
Locked |
Modulation |
256 QAM |
| Channel ID |
2 |
Symbol rate |
5360537 |
| Downstream Frequency |
783000000 Hz |
Downstream Power |
9.1820 dBmV |
| SNR |
37.9359 dBmV |
Correctables |
393 |
| Uncorrectables |
1374 |
|
|
|
|
| Downstream Channel 2 |
| Lock Status |
Locked |
Modulation |
256 QAM |
| Channel ID |
3 |
Symbol rate |
5360537 |
| Downstream Frequency |
795000000 Hz |
Downstream Power |
8.6046 dBmV |
| SNR |
37.9359 dBmV |
Correctables |
414 |
| Uncorrectables |
469 |
|
|
|
|
| Downstream Channel 3 |
| Lock Status |
Locked |
Modulation |
256 QAM |
| Channel ID |
4 |
Symbol rate |
5360537 |
| Downstream Frequency |
801000000 Hz |
Downstream Power |
8.9304 dBmV |
| SNR |
38.2578 dBmV |
Correctables |
1644 |
| Uncorrectables |
8457 |
|
|
|
|
| Upstream Channel 0 |
| Lock Status |
Locked |
Modulation |
64QAM |
| Channel ID |
4 |
Symbol rate |
5120 Ksym/sec |
| Upstream Frequency |
36700000 Hz |
Upstream Power |
35.7500 dBmV |
|
|
| Upstream Channel 1 |
| Lock Status |
Not Locked |
Modulation |
|
| Channel ID |
0 |
Symbol rate |
0 Ksym/sec |
| Upstream Frequency |
0 Hz |
Upstream Power |
0 dBmV |
|
|
| Upstream Channel 2 |
| Lock Status |
Not Locked |
Modulation |
|
| Channel ID |
0 |
Symbol rate |
0 Ksym/sec |
| Upstream Frequency |
0 Hz |
Upstream Power |
0 dBmV |
|
|
| Upstream Channel 3 |
| Lock Status |
Not Locked |
Modulation |
|
| Channel ID |
0 |
Symbol rate |
0 Ksym/sec |
| Upstream Frequency |
0 Hz |
Upstream Power |
0 dBmV |
|
|
| Current System Time:Tue Jan 16 14:34:19 2018 |
This is a recent error log
| Tue Jan 2 23:12:32 2018 |
Critical (3) |
No Ranging Response received - T3 time-out;CM-MAC=e8:fc:af:ad... |
| Wed Jan 3 23:11:16 2018 |
Notice (6) |
DHCP Renew - lease parameters tftp file-^1/C312B450/DEF/001 m... |
| Sun Jan 7 08:49:02 2018 |
Critical (3) |
No Ranging Response received - T3 time-out;CM-MAC=e8:fc:af:ad |
| Sun Jan 14 11:11:16 2018 |
Notice (6) |
DHCP Renew - lease parameters tftp file-^1/C312B450/DEF/001 m... |
| Time Not Established |
Warning (5) |
MDD message timeout;CM-MAC=e8:fc:af:ad:XX:XX;CMTS-MAC=2c:86:d... |
| Mon Jan 15 16:26:20 2018 |
Warning (5) |
MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=... |
| Mon Jan 15 16:26:20 2018 |
Notice (6) |
TLV-11 - unrecognized OID;CM-MAC=e8:fc:af:ad:XX:XX |
a note--I've modified the modem MAC address in this log for security.
I'm trying to confirm if I've got a modem in a pre fail state. If that is the case, I don't need a truck roll to my site.
Advice on next steps?
Thanks
