Linksys AE3000 on a SBG6580 Modem
I am having HUGE issues with my internet using my Linksys AE3000. My internalwireless adapter works on my laptop without any hangups or drops at all. My AE3000 when plugged in works for 5 minutes and freezes and has to be reset on both my desktop and laptop using newest drivers and old drives with doing fresh installs each time. I sent in 1 AE3000 to be replaced and the new one does the same thing. I even had it plugged into my laptopright next to the modem and still did it. Then when I unplugged it and turned on the laptops internal wireless the laptop worked fine. I have reformatted, released and refreshed my IP, direct connected cable modem to cable hardline with NO splitters, replaced AE3000 Unit, tested on twodifferent computers which did not work, Internal laptop adapter works fine,uninstalled/deleted drivers/registrys and reinstalled fresh copys.Linksys support was worthless. Here are my specs, any thoughts: Startup Procedure Procedure Status Comment Acquire Downstream Channel Locked Connectivity State OK Operational Boot State OK Operational Configuration File Security Enabled BPI+ Downstream Bonded Channels Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables Uncorrectables 1 Locked QAM256 121 825000000 Hz 4.6 dBmV 38.6 dB 1199 1260 2 Locked QAM256 122 831000000 Hz 5.0 dBmV 38.6 dB 1289 1178 3 Locked QAM256 123 837000000 Hz 5.0 dBmV 38.7 dB 975 955 4 Locked QAM256 127 861000000 Hz 3.4 dBmV 37.9 dB 846 794 5 Locked QAM256 128 867000000 Hz 3.4 dBmV 37.9 dB 853 976 6 Locked QAM256 129 873000000 Hz 4.1 dBmV 37.9 dB 732 817 7 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0 8 Not Locked Unknown 0 0 Hz 0.0 dBmV 0.0 dB 0 0 Upstream Bonded Channels Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power 1 Locked TDMA and ATDMA 1 2560 Ksym/sec 23300000 Hz 39.2 dBmV 2 Locked ATDMA 2 5120 Ksym/sec 29600000 Hz 39.2 dBmV 3 Locked ATDMA 3 5120 Ksym/sec 36100000 Hz 39.2 dBmV 4 Not Locked Unknown 0 0 Ksym/sec 0 Hz 0.0 dBmV5.3KViews0likes11CommentsPanoramic Wifi connectivity issues with laptop only
I just installed the Panoramic device and Cox internet at home. The WIFI works well with other devices but not with my laptop. My laptop is Dell XPS15 and itdoesn't any problem connected to other WIFI or my iphone hotspot. The connection with my laptop dropped very often and I need to restart the Panoramic device every time. It's really very inconvenient because I need to work at home. Can you please help me with that? Thank you very much!3KViews0likes6CommentsGigablast Speed issues
I am certainly hoping someone has run into the same issues that I am having cause I am running out of options. I have the gigablast service and even when I am using a wired connection the best speed I can get is around 700 Mbps down however my upload speeds are usually just fine. I am running an HP Spectre x360 convertible (2017 edition) and am using a USB-C to RJ45 adapter. Also even when I connect using wireless the best that I can get is around 450 down and around 400 up. I am fully aware the wireless will be slower. I am using an Araknis router and Araknis gigabit access point. I have checked everything and everything seems to be running fine yet I have no idea why I can't get download speeds up around 900 consistently. Any help or suggestions would be appreciated.1.3KViews0likes1Comment