New modem is still getting constant T3 and Dynamic Range Window violation errors
Equipment: OLD Netgear CM1200 (bought in 2020) Google Nest Wifi and Access Point (bought in 2021) TPLink 5 port switch NEW Arris SB8200 (purchased yesterday) Since the beginning of December 2022 my 2 year old NetGear CM1200 had been disconnecting daily between 6am-9am and every single day I had to physically reset the modem since the COX app and chat support couldn't reset it remotely. COX chat claimed it was my 27 devices connected to Wifi (I had the ultimate plan) and that I needed to upgrade to the Gigablast. Conveniently the Gigablast plan was on a deal that was $5 less than the Ultimate so I upgraded, same issue. I had a technician finally come out a couple days ago and he checked EVERYTHING. He checked the following with the following results Checked the connection to the CM1200, speeds on Gigablast was about 430mbps download and 27 upload. Disconnected the router and modem, connected directly to the Coax cable from the wall, speeds were then 830mbps download and 36 upload. Tested 10,000 packets and none were lost. Checked the network hub in the laundry room that came with the house (I don't use it since I don't have a switch in there), he saw there was a MoCA connection (I believe?) where the outside network Coax line was connected to the office coax line (which my modem was connected to) so he disconnected them and tested the connection to the outside network. The test results were 830mbps download and 36 upload.Tested 10,000 packets and none were lost. He went outside to check the network box on the side of my house and confirmed there is no splitter and that it's a direct connection, he tested the connection and the speeds were the same as inside.Tested 10,000 packets and none were lost. He went to the utilities box and tested the line there, he tested 10,000 packets and none were lost. Speeds were the same as in the house. All tests were normal. Ultimately he said that my modem was "likely" the problem and that I should try a new one to see if things improve. I purchased the Arris SB8200 yesterday, I chatted with Cox to activate it around 2pm and everything was good until 2am when my Google Nest Wifi notified me that the internet went out for 30 mins. I haven't had any outages since 2am so I checked the logs and it looks the same as the CM1200 logs were.980Views0likes11CommentsUpstream / Upload issues leading to huge ping spikes
I've done everything I can on my end to mitigate the issues im having. All new coax in home. One brand new 2 way splitter for cable modem and TV box (-3.5db) All connections are firmly tightened and secured. Docsis 3.1 32x8 (2x2). Signal levels all in range T3 timeouts on event log. Cox has tested my lines in home and at the road. They say all it fine. Cox runs a ping plotter in my area...again, all is fine. My issue is terribly fluctuating upload speeds and this leads to drastic ping spikes which massively effects my gaming. Since cox has no idea what they are doing... is there anything I can do to mitigate this? I was doing some research and I saw this (image attached). Would something like this work? Or is there something that I can implement myself that will fix this issue? Last i heard from cox, they said my neighborhood has "Intermittent Noise Issues" Its been this way for years.. Way before Hurricane Laura Way before Covid 19. I need a miracle....somebody lol /resized-image/__size/320x240/__key/communityserver-discussions-components-files/5/Screenshot_5F00_20200830_2D00_215300_5F00_Chrome.jpg593Views0likes2CommentsPaying for tech to investigate Intermittent Service disruption (i.e. timeouts) in 85255
I gave in to pay for a data tech, since there was a timeout this morning first day of school; not good! Tech is scheduled for morning on Thursday 13th, so I'll post results for those interested. Stay tuned My issues as others are noted in this post Inconsistent Service Disruptions (i.e. T3,T11,T4) - since July service work1.5KViews1like7CommentsT3/T4 timeouts, high packet loss, Internet connection drops randomly
This has been happening from day 1, 60 days ago. I've contacted support multiple times and have gotten the usual "everything looks good" run-around answer. Here are my PingPlotter Pro results and modem's connection logs: https://drive.google.com/open?id=1CyOG_D4BJdNEcsskxWDh7xpgWLx9xfPf https://drive.google.com/file/d/1lZY7Io3-WJNUujKpN2zlqb6vl5KDfvFf/view?usp=sharing1.9KViews0likes7CommentsSuspiciously High Data Usage, Netgear CM1000 Modem errors and Connection Issues...
I cancelled my contract with AT&T and switched over to Cox Gigablast last year for $119 a month. After the first few months of exceeding the 1TB data cap I went ahead and upgraded to the unlimited plan ($49.99/mo) to avoid all the overcharges. I've been having a lot of connection problems and intermittent upload/download speeds the past several months. Went to the Cox website to see if there was a fix and noticed my data usage is still high (roughly 2TB a month). Considering I really only play Xbox One and use Chromecast to watch shows on Hulu/YouTube TV (720p/1080p only), I'm a little suspicious. I checked the event log for my Netgear CM1000 modem and noticed a bunch of errors piled up such as: RNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW Dynamic Range Window violation TLV-11 - unrecognized OID; I'll add the event log and cable connection info below, if someone could take a look and help me make sense of all this I'd greatly appreciate it. CM1000 Event Log: Time Priority Description 2019-04-10, 20:14:50 Warning (5) Dynamic Range Window violation 2019-04-10, 20:14:50 Warning (5) RNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; 2019-04-10, 20:14:42 Notice (6) DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3 .;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; 2019-04-10, 20:14:32 Notice (6) TLV-11 - unrecognized OID;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Notice (6) Honoring MDD; IP provisioning mode = IPv4 Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; 2019-03-18, 10:41:37 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; 2019-02-24, 17:26:06 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; 2019-02-24, 14:14:28 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; 2019-02-24, 14:14:21 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; 2019-02-24, 10:21:15 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) DHCP FAILED - Discover sent, no offer received;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; 2019-01-24, 01:15:14 Critical (3) Resetting the cable modem due to docsDevResetNow 2019-01-18, 19:48:08 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; 2019-01-01, 00:56:51 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) No Ranging Response received - T3 time-out;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=70:6e:6d:2d:7e:ae;CM-QOS=1.1;CM-VER=3.1; Time Not Established Critical (3) SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=cc:40:d0:25:6c:48;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1; CM1000 Cable Connections Info: Frequency start Value This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect. Starting Frequency <tabindex=-1>Startup Procedure Procedure Status Comment Acquire Downstream Channel 747000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Security Enable BPI+ IP Provisioning Mode Honor MDD IPv4 only <tabindex=-1>Downstream Bonded Channels Channel Lock Status Modulation Channel ID Frequency Power SNR / MER Unerrored Codewords Correctable Codewords Uncorrectable Codewords 1 Locked QAM256 12 747000000 Hz -0.3 dBmV 40.6 dB 2001198088 0 0 2 Locked QAM256 1 681000000 Hz -0.1 dBmV 40.9 dB 2000032230 0 0 3 Locked QAM256 2 687000000 Hz -0.4 dBmV 40.7 dB 2000043341 0 0 4 Locked QAM256 3 693000000 Hz -0.1 dBmV 40.3 dB 2000051596 0 0 5 Locked QAM256 4 699000000 Hz -0.5 dBmV 40.8 dB 2000060887 0 0 6 Locked QAM256 9 729000000 Hz -0.4 dBmV 40.5 dB 2000070749 0 0 7 Locked QAM256 10 735000000 Hz -0.2 dBmV 40.8 dB 2000079477 0 0 8 Locked QAM256 11 741000000 Hz -0.6 dBmV 40.6 dB 2000136913 0 0 9 Locked QAM256 17 777000000 Hz -0.4 dBmV 40.7 dB 2000154306 0 0 10 Locked QAM256 18 783000000 Hz -0.9 dBmV 40.7 dB 2000165882 0 0 11 Locked QAM256 19 789000000 Hz -0.9 dBmV 40.7 dB 2000174976 0 0 12 Locked QAM256 20 795000000 Hz -1.5 dBmV 40.5 dB 2000184328 0 0 13 Locked QAM256 21 801000000 Hz -1.7 dBmV 40.6 dB 2000192574 0 0 14 Locked QAM256 22 807000000 Hz -1.9 dBmV 40.5 dB 2000203480 0 0 15 Locked QAM256 25 825000000 Hz -2.3 dBmV 40.4 dB 2000193485 3654 12449 16 Locked QAM256 26 831000000 Hz -1.7 dBmV 40.4 dB 2000217773 1306 2609 17 Locked QAM256 27 837000000 Hz -1.7 dBmV 40.4 dB 2000211699 4799 15998 18 Locked QAM256 28 843000000 Hz -1.3 dBmV 40.5 dB 2000225199 4150 11140 19 Locked QAM256 29 849000000 Hz -1.0 dBmV 40.6 dB 2000250514 0 0 20 Locked QAM256 30 855000000 Hz -0.9 dBmV 40.7 dB 2000259503 0 0 21 Locked QAM256 33 357000000 Hz -3.0 dBmV 40.0 dB 2000269575 0 0 22 Locked QAM256 34 363000000 Hz -3.3 dBmV 40.3 dB 2000279148 0 0 23 Locked QAM256 35 369000000 Hz -3.2 dBmV 40.4 dB 2000287527 0 0 24 Locked QAM256 36 375000000 Hz -3.2 dBmV 40.3 dB 2000297314 0 0 25 Locked QAM256 37 381000000 Hz -2.8 dBmV 40.3 dB 2000306978 0 0 26 Locked QAM256 38 387000000 Hz -2.8 dBmV 39.8 dB 2000317294 0 0 27 Locked QAM256 41 405000000 Hz -2.3 dBmV 40.5 dB 2000325948 0 0 28 Locked QAM256 42 411000000 Hz -2.2 dBmV 40.8 dB 2000335715 0 0 29 Locked QAM256 43 417000000 Hz -2.2 dBmV 40.6 dB 2000352368 0 0 30 Locked QAM256 44 423000000 Hz -2.0 dBmV 40.7 dB 2000361024 0 0 31 Locked QAM256 45 429000000 Hz -2.0 dBmV 40.7 dB 2000368513 0 0 32 Locked QAM256 46 435000000 Hz -2.0 dBmV 40.6 dB 2000375095 0 0 <tabindex=-1>Upstream Bonded Channels Channel Lock Status Modulation Channel ID Frequency Power 1 Locked ATDMA 1 17600000 Hz 38.0 dBmV 2 Locked ATDMA 2 24000000 Hz 39.3 dBmV 3 Locked ATDMA 3 30400000 Hz 40.8 dBmV 4 Locked ATDMA 4 36800000 Hz 41.0 dBmV 5 Not Locked Unknown 0 0 Hz 0.0 dBmV 6 Not Locked Unknown 0 0 Hz 0.0 dBmV 7 Not Locked Unknown 0 0 Hz 0.0 dBmV 8 Not Locked Unknown 0 0 Hz 0.0 dBmV <tabindex=-1>Downstream OFDM Channels Channel Lock Status Modulation / Profile ID Channel ID Frequency Power SNR / MER Active Subcarrier Number Range Unerrored Codewords Correctable Codewords Uncorrectable Codewords 1 Locked 0, 1, 2, 3 159 300000000 Hz 1.0 dBmV 41.8 dB 1108 ~ 2987 1909972654 55424692 0 2 Not Locked 0 0 0 Hz -1.9 dBmV 0.0 dB 0 ~ 4095 0 0 0 <tabindex=-1>Upstream OFDMA Channels Channel Lock Status Modulation / Profile ID Channel ID Frequency Power 1 Not Locked Unknown 0 0 Hz 0 dBmV 2 Not Locked Unknown 0 0 Hz 0 dBmV My Equipment/Info: Cox Gigablast 1000/35 + Unlimited data Linksys WRT3200ACM Netgear CM10001.6KViews0likes1CommentI
I check my modem stats at least once a week. Today I found the following: Sun Sep 30 00:24:48 2018 Critical (3) Started Unicast Maintenance Ranging - No Response received - T3 time-out; CM-MAC=00:40:36:4e:aa:ea;CMTS-MAC=00:25:84:57:11:c5;CM-QOS=1.1;CM-VER=3.1;" Sun Sep 30 17:07:17 2018 Warning (5) Dynamic Range Window violation" From what I have read online this is something at COX that needs to be fixed.Can a ticket be issued from here or do I need to call in?847Views0likes1CommentUpstream issues/intermittent connection problem
Greetings, I seem to be having connection issues whenever the upstream light on my modem starts blinking rather than remaining solid. The short of it: Modem: Netgear CM700 Upstream light on my modem should be a solid green. When I lose connection to the internet the upstream light is blinking and if the issue doesn't resolve the modem will cycle downstream/upstream until it connects. Sometimes I have to reboot the modem for it to actually reconnect to the internet. This is a brand new modem but I was having similar issues with my old Arris SURFboard before I switched to this. This issue persists if I remove the router from the picture. I already had a tech out early morning on Saturday and he was unable to see any problem with my modem or the line. He thought maybe it was my old coaxial cable and provided/installed a new one. Modem worked fine for about 2 hours then went right back into the unpredictable connection routine. I have another tech coming out Monday evening to see if they can help me but I would like to ask for other avenues for the tech to investigate if they do not see any problems again. I managed to get to a T2 and talked over my issue and since it's intermittent and didn't occur while I was on the line they weren't seeing any issues. Modem event log at time of an upstream error causing connection issue: Apr 08 2018 11:53:24 Critical (3) Unicast Ranging Received Abort Response - initializing MAC Apr 08 2018 11:53:24 Critical (3) No Ranging Response received - T3 time-out Apr 08 2018 11:53:44 Critical (3) Unicast Ranging Received Abort Response - initializing MAC Apr 08 2018 11:53:44 Critical (3) No Ranging Response received - T3 time-out Apr 08 2018 11:54:04 Critical (3) Unicast Ranging Received Abort Response - initializing MAC Apr 08 2018 11:54:04 Critical (3) No Ranging Response received - T3 time-out Apr 08 2018 11:54:24 Critical (3) Unicast Ranging Received Abort Response - initializing MAC Apr 08 2018 11:54:24 Critical (3) No Ranging Response received - T3 time-out Apr 08 2018 11:54:55 Warning (5) MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1 Apr 08 2018 11:54:55 Notice (6) TLV-11 - unrecognized OID Modem information at time of writing: Downstream Bonded Channels Channel Lock Status Modulation Channel ID Frequency Power SNR Correctables UnCorrectables 1 Locked QAM 256 33 357000000 Hz 2.7 dBmV 38.9 dB 9 25 2 Locked QAM 256 34 363000000 Hz 2.7 dBmV 40.3 dB 15 18 3 Locked QAM 256 35 369000000 Hz 3.0 dBmV 40.3 dB 17 26 4 Locked QAM 256 36 375000000 Hz 2.9 dBmV 40.3 dB 32 11 5 Locked QAM 256 37 381000000 Hz 3.0 dBmV 39.5 dB 9 27 6 Locked QAM 256 38 387000000 Hz 2.5 dBmV 39.9 dB 9 26 7 Locked QAM 256 41 405000000 Hz 2.9 dBmV 39.9 dB 7 28 8 Locked QAM 256 42 411000000 Hz 2.7 dBmV 39.5 dB 7 27 9 Locked QAM 256 43 417000000 Hz 2.7 dBmV 39.9 dB 5 29 10 Locked QAM 256 44 423000000 Hz 2.5 dBmV 39.9 dB 8 29 11 Locked QAM 256 45 429000000 Hz 2.7 dBmV 39.5 dB 7 27 12 Locked QAM 256 46 435000000 Hz 2.9 dBmV 39.9 dB 6 28 13 Locked QAM 256 1 783000000 Hz 1.4 dBmV 38.6 dB 0 0 14 Locked QAM 256 2 789000000 Hz 1.4 dBmV 38.9 dB 0 0 15 Locked QAM 256 3 795000000 Hz 1.5 dBmV 38.6 dB 0 0 16 Locked QAM 256 4 801000000 Hz 1.4 dBmV 38.9 dB 3 0 17 Locked QAM 256 9 831000000 Hz 0.5 dBmV 37.6 dB 113 1057 18 Locked QAM 256 10 837000000 Hz 0.5 dBmV 38.6 dB 185 1998 19 Locked QAM 256 11 843000000 Hz 0.0 dBmV 37.6 dB 3 0 20 Locked QAM 256 12 849000000 Hz 0.2 dBmV 37.6 dB 2 0 21 Locked QAM 256 17 879000000 Hz -1.2 dBmV 37.3 dB 5 0 22 Locked QAM 256 18 885000000 Hz -1.7 dBmV 37.3 dB 21 0 23 Locked QAM 256 19 891000000 Hz -1.5 dBmV 37.3 dB 33 0 24 Locked QAM 256 20 897000000 Hz -2.0 dBmV 36.6 dB 118 1018 25 Locked QAM 256 21 903000000 Hz -2.4 dBmV 36.6 dB 133 915 26 Locked QAM 256 22 909000000 Hz -2.5 dBmV 36.6 dB 512 1154 27 Locked QAM 256 25 927000000 Hz -3.2 dBmV 36.3 dB 18 0 28 Locked QAM 256 26 933000000 Hz -3.0 dBmV 36.3 dB 4 0 29 Locked QAM 256 27 939000000 Hz -3.2 dBmV 36.3 dB 1 0 30 Locked QAM 256 28 945000000 Hz -3.2 dBmV 36.6 dB 0 0 31 Locked QAM 256 29 951000000 Hz -3.7 dBmV 36.6 dB 4 0 32 Locked QAM 256 30 957000000 Hz -3.7 dBmV 36.6 dB 1 0 Upstream Bonded Channels Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power 1 Locked ATDMA 1 2560 Ksym/sec 18400000 Hz 45.0 dBmV 2 Locked ATDMA 2 5120 Ksym/sec 23300000 Hz 45.0 dBmV 3 Locked ATDMA 3 5120 Ksym/sec 29800000 Hz 47.5 dBmV 4 Locked ATDMA 4 5120 Ksym/sec 36300000 Hz 47.5 dBmV 5 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 6 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 7 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 8 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV I didn't grab the upstream information like I thought I did right after the reboot but channels 3 and 4 were around 49 dBmV when the modem reconnected to the internet. Thank you in advance for any further questions I can pose to the tech that will be out and for your assistance. Respectfully, Michael **update** Managed to get into the modem during one of these episodes: Upstream Bonded Channels Channel Lock Status US Channel Type Channel ID Symbol Rate Frequency Power 1 Locked ATDMA 1 2560 Ksym/sec 18400000 Hz 51.0 dBmV 2 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 3 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 4 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 51.0 dBmV 5 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 51.0 dBmV 6 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 51.0 dBmV 7 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV 8 Not Locked N/A Unknown 0 Ksym/sec 0 Hz 0.0 dBmV21KViews0likes10CommentsPanoramic WiFi signal lost
so we had Panoramic so if for about three months and we had to many issue. Almost every other weekend our singal for both 2.4 and 5g can’t connect to a single device around the house. Trying to reset through with an operator couple times and they couldn’t connect. They recommend us that it was a equipment issue and to go return it. We did and we still have the issue. A cox contractor and fixed for a while. Yet agian we are having issue with our wifif.1.2KViews0likes2Comments20-30% Packet Loss Every 6-8 hours.
Let me start off by saying I'm a former sub-contractor for Cox here in Las Vegas. We've had Cox internet here for around 16 months, and we didn't have to call in a single time until a little over a month ago. Since then, we had three technicians out with a fourth scheduled to come out tomorrow. After speaking with Cox initially, we purchased a new 16x4 channel modem (replacing a 8x4 channel modem that was perfectly fine for our rated service), we also purchased a replacement router, and we replaced all ethernet wiring by hand. We did this because initially the representatives initial resolution was to reset the log files on the modem, and reboot it - not a long term fix, of course, but they wanted to blame the modem - so we did along with everything else. It goes without saying, we also run the same tests bypassing the router completely with the packet loss still being exactly the same as it was through the home hard-wired network. We got somewhat lucky though, and our third technician found ingress feeding the tap from ALL THREE neighbors we share our 4 port tap with - one of them being bad enough to disconnect on the spot. The problem is, at the time the technician was out, we weren't experiencing the packet loss issue. So this showed us that the CMTS and tap were pretty resilient to some upstream ingress abuses. After that, the internet was good for a solid SIX HOURS before the issue came back. 20-30% Packet Loss when running a ping straight to head-end (10.74.128.1). This happens nearly every day around 6pm to around 12pm, and on the weekends it happens in the middle of the day as well. Sometimes it happens for 3 minutes, and goes away for 3 hours, and sometimes it happens for 6 hours, and goes away foran hour. After a month of research, and testing, and technicians, the issue is clear - ALL THREE of my neighbors who I share a tap with are feeding enoughUPSTREAM INGRESS in to the tap, that our return path is being drowned out by the noise. Some more evidence that it's an issue with UPSTREAM INGRESS from all of our neighbors is that when the issue is going strong, the SNR on 2 of the our 4 upstream channels falls below 20 (confirmed by two Cox reps). Some further proof that it's an issue with UPSTREAM INGRESSis that my modem has no T4 timeouts, the few it has is from me disconnecting the cable from it when swapping modems. But it sure gets a lot of T3 timeouts.The reason is never gets T4 timeouts is because the modem always receives the message to send a ranging requests from the CMTS (because that would be a DOWNSTREAM action). And the T3 timeouts are caused by my modem attempting to respond to those ranging requests, but instead being drowned out by my three neighborsUPSTREAM INGRESS. After that wall of text, here's my concluding question: We have a fourth technician coming out tomorrow, what do I have to say or do in order to actually resolve this issue for good? Thanks.1.3KViews0likes2CommentsSlow speed after 9 pm!
My internet severely slows in speed when I need it the most! The speed test shows 8-15 mbps for download and upload speeds. That's using Cox's own speed test! New router and modem. Ethernet and wifi. No other users online. Cleared cache history. Rebooted router and modem. I'm paying for 150 mpbs. The techs have come out multiple times, the last one being less than two days ago. Cox is going to get me fired from my job!!!1KViews0likes1Comment