Los Angeles area. I have a series recording defined for "Great Performances" which comes on PBS, and have new, recent, and older performances recorded there.
Bottom line summary: Unless I choose the "All Devices" I don't see the series recording(s) listed. So obviously I can't watch anything in that series. I think I have about 6 performances saved.
john2222...I'm in Orange Co with a 2 Contour DVR (2max record) sitting in 2 rooms attached to 2 TVs. The old 2 DVR setup was just that...2 independent systems, one Cox Coaxial line. I have a box in my closet that Cox come into, then there must be splinters that send separate cables to each room. I have the DVR connected to room coaxial. Also, my Media room has another splinter that I have my Internet Modem. I get about 240Mbps Cox speedtool from this and WiFi.
I too used Series, however I did not have old shows, only tried to create new ones but ran into another problem with series.....you cannot tell the series that you want to record at a specific time on that channel. If you Great Performance, say New is conflicting with 2 other records or viewing, and if there is a repeat showing, the Old DVR system allow you pick a specific time for that to record. Of course, you can always go to the guide, look for the repeated show, and record as "new and repeat." But now, you end up getting "All the repeats that you must now Cancel from the "Scheduled"...but this is another issue that I've posted.
I'm still mad about the recordings onto which machine. If you define recorded shows using either DVR, there is no way to predict which machine the recording is actually on, I see the "recordedON" under Scheduled and it point to either room. However, when actually recorded, I can toggle the filter and sometimes Watch the show that is supposed to be on the other DVR.
I also see that when a show is being recorded, Both DVR's red record light is on, however, only one DVR actually has the recording. This system does not work like a host/multiple Client setup. You Cannot (I believe) actually view the physical contents from the other DVR.
I ramble on, but john2222, try testing this record option. Do records from different DVR and see if they appear on the specific unit. The Schedule will show contents from both, but record on only one, that you cannot choose.
I can watch, by toggle the RecordedOn shows identified on both rooms, BUT when I go to the other DVR, I do not see the same shows. I think the RecordedOn indicator is False Info...whew!
