Modem Information Page
I have a Motorola modem that I purchased, not supplied by Cox and I can no longer reach the Modem Information Page 192.168.100.1 I used to be able to access it to check signal levels, etc., but not ...
Forum Discussion
I had the same problem on 2 devices: unreachable, timeouts and no ping. I too had just replaced the modem but the new modem wouldn't issue a new certificate...or if there was ever a certificate with the previous modem.
I wish I knew what I specifically did...or did anything at all...but the browser eventually and finally displayed the Add the Certificate page.
In no particular order, things I did...
- Reset Modem from Cox Page
- Disabled Firewalls
- Forced Certificate Update
- Rebuilt TCP/IP Stack
- Updated NIC Drivers (Although I Knew No Updates were Available)
- Direct Wire
Direct Wire works so I think it is narrowed down to the router not being able to find a route to it. The router is 192.168.1.1 and the modem is 192.168.100.1 so it's in a different network.
Router can't communicate with other networks?
Your modem and router share an address table. When you initially connect a modem to a router, both initially communicate to create the table.
You probably just need to recreate an initial install to rebuild the table.
Meaning it can only route (connect) to devices on the same subnet 192.168.1.x The modem lies outside of this subnet at 192.168.100.1.
My problem now is that I'm not able to create that static route to that address.
- Hi AZBigdog, we do not block, throttle, or otherwise interfere with anyone's desire to go where they want on the internet. I would recommend contacting the manufacturer directly. Here is their contact information
Motorola Modems: 877-466-8646
www.motorola.com/support
-Kevin
