The statuses listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem.
| Startup Procedure | ||
|---|---|---|
| Procedure | Status | Comment |
| Acquire Downstream Channel | Locked | |
| Connectivity State | OK | Operational |
| Boot State | OK | Operational |
| Configuration File | OK | |
| Security | Enabled | BPI+ |
| DOCSIS Network Access Enabled | Allowed | |
| Downstream Bonded Channels | ||||||||
|---|---|---|---|---|---|---|---|---|
| Channel | Lock Status | Modulation | Channel ID | Frequency | Power | SNR | Corrected | Uncorrectables |
| 1 | Locked | QAM256 | 29 | 951000000 Hz | 5.9 dBmV | 31.8 dB | 16 | 0 |
| 2 | Locked | QAM256 | 17 | 879000000 Hz | 8.1 dBmV | 32.5 dB | 0 | 0 |
| 3 | Locked | QAM256 | 18 | 885000000 Hz | 7.8 dBmV | 32.4 dB | 10 | 0 |
| 4 | Locked | QAM256 | 19 | 891000000 Hz | 7.5 dBmV | 32.4 dB | 0 | 0 |
| 5 | Locked | QAM256 | 20 | 897000000 Hz | 7.1 dBmV | 32.3 dB | 4 | 0 |
| 6 | Locked | QAM256 | 21 | 903000000 Hz | 6.7 dBmV | 32.3 dB | 14 | 0 |
| 7 | Locked | QAM256 | 22 | 909000000 Hz | 6.7 dBmV | 32.2 dB | 10 | 0 |
| 8 | Locked | QAM256 | 23 | 915000000 Hz | 6.7 dBmV | 32.2 dB | 22 | 0 |
| 9 | Locked | QAM256 | 24 | 921000000 Hz | 6.7 dBmV | 32.1 dB | 20 | 0 |
| 10 | Locked | QAM256 | 25 | 927000000 Hz | 6.8 dBmV | 32.0 dB | 26 | 0 |
| 11 | Locked | QAM256 | 26 | 933000000 Hz | 6.6 dBmV | 32.0 dB | 15 | 0 |
| 12 | Locked | QAM256 | 27 | 939000000 Hz | 6.5 dBmV | 32.0 dB | 28 | 0 |
| 13 | Locked | QAM256 | 28 | 945000000 Hz | 6.4 dBmV | 31.9 dB | 45 | 0 |
| 14 | Locked | QAM256 | 30 | 957000000 Hz | 6.0 dBmV | 31.8 dB | 42 | 0 |
| 15 | Locked | QAM256 | 31 | 963000000 Hz | 5.8 dBmV | 31.8 dB | 25 | 0 |
| 16 | Locked | QAM256 | 32 | 969000000 Hz | 6.1 dBmV | 31.7 dB | 62 | 0 |
| Upstream Bonded Channels | ||||||
|---|---|---|---|---|---|---|
| Channel | Lock Status | US Channel Type | Channel ID | Symbol Rate | Frequency | Power |
| 1 | Locked | ATDMA | 1 | 5120 Ksym/sec | 36800000 Hz | 32.7 dBmV |
| 2 | Locked | ATDMA | 2 | 5120 Ksym/sec | 30400000 Hz | 34.2 dBmV |
| 3 | Locked | ATDMA | 3 | 5120 Ksym/sec | 24000000 Hz | 32.7 dBmV |
| 4 | Locked | ATDMA | 4 | 5120 Ksym/sec | 17600000 Hz | 32.7 dBmV |
Current System Time: Thu Dec 29 11:00:40 2022
Well you are bonding on all 16 downstream channels, but your SNR is low. It should be above 35-36. What did the technicians say about that? Also, can you explain how the coaxial gets from the street to the room the modem is in? Any splitters or amps?
Also, I assume you have connected direct to the modem and done a speed test that way, to rule out the router.
Actually, SNR should be over 30, less than 30 is a problem.
SNR should be over 30, less than 30 is a problem.
From my experience, I have seen problems when ever the SNR is below 35. However you are right, technically 30 is the spec.
I R A En'g'ineer. Technical is what we do.<G>
they did not comment on the SNR. No splitters or amps.
Speed test done by the cox technicians direct to the modem was 30up/3down.
Techs tested a new modem (from cox 3.1) and did a direct speed test and it was 178download.
Have you done a speedtst direct to the 6183?
