wired

5 Topics

WiFi works but wired Ethernet and cable tv do not.
Let me tell you my setup to start off: I have a 2 way splitter outside my house that runs 1 coax connection to my living room (where my Contour box is) and 1 connection to my basement (where my panoramic modem/router is). 2 days ago I moved my modem/router upstairs so I could hardwire my Xbox instead of using WiFi in hopes of getting a better connection. Upon reestablishing connection to the modem/router I plugged in my Xbox via Ethernet. It showed a connection, but I did not have any access to internet applications, or the Xbox live service. I power cycled the modem/router and my Xbox to no avail so I ended up factory resetting the modem/router. This didn’t do anything either so I took it back downstairs, plugged it back in, and connected it back to my PC via Ethernet. I haven’t noticed anything wrong until today when I logged on my pc and found that I had no access to internet. WiFi is working on all devices, but I have no access to things like websites, email, discord etc. on my pc over the Ethernet cable. My PC shows the Ethernet connection just like my Xbox did (yes the connection is enabled). It shows packets being sent and received. I have it set to obtain IP address automatically and obtain DNS server automatically for both IPv4 and IPv6. DHCP is enabled. I have tried turning off the windows firewall, flushing DNS, Winsock reset etc. Ipconfig gives me normal results, and windows diagnostics and troubleshoot cannot detect any problems. here’s the weird part - I can get on google chrome and google.com works. I can even use the search tool and I will get results! But none of the sites load after I click on them, or they load like the initial logo of the site but it goes no further. My cable is also not functioning correctly either. Only the guide will load, but when I select a channel I just get a blank screen. I can login to the router using 192.168.0.1 and everything looks good. Shows the Ethernet port as active. I can see the connected devices too. I have also tried using different Ethernet cables and different ports on the modem. Because the internet on my pc was fine before I initially tried relocating my router I am leaning in the direction that the issues is not with my PC. if you can solve this then you deserve a medal lol. PLEASE HELP Edit: feel like I should add that the network status in the bottom right of my pc is not yellow or red. It shows just like it normally should. Also I don’t get an error page after trying to reach a website, it just loads forever and nothing happens.
stratmo 4 years ago Place Internet
3.1KViews
0likes
4Comments
Unusably Slow Ethernet Speed from Panoramic Gateway with Gigablast
Hello, I just finished installing Gigblast wifi today, and my wireless internet works fine. However, when trying to connect the included ethernet cable to my laptop, my laptop says it connects successfully with internet access, but it is so slow that I can not load any pages. I have tried many possible fixes, such as flushing my DNS cache, re-installing my ethernet driver on my computer, restarting the gateway, and disabling my firewall, but nothing has worked so far. Windows network status says that I am connected to the internet. For a full list of things I've tried (probably not exhaustive either)... Restarting computer Restarting/rebooting gateway Setting TCP/IPv4 properties to automatically obtain IP/DNS server ipconfig /flushdns ipconfig /release ipconfig /renew netsh winsock reset Disable Windows firewall Disable firewall in Cox gateway settings LAN Ethernet link status is active in Cox gateway settings Try different ethernet cables Try both ethernet ports Disabling/re-enabling ethernet network adapter Check/uncheck TCP/IPv6 in ethernet properties Disconnect from wireless network Ran TCP Optimizer Checked hosts file (nothing in there) Get-NetAdapter in PowerShell shows link speed of 1 Gbps Disable/enable "Automatically detect settings" in Windows proxy settings Windows network reset Clear cache in web browser Tried multiple browsers with all extensions disabled Any other suggestions would be appreciated. Thank you.
eaternet 4 years ago Place Internet
5.1KViews
0likes
5Comments
Is it possible to have two wired connections (Two Active Cable Outlets)?
When doing the self setup I first tried the cable upstairs in my office and nothing. It said something about finding the "Active cable outlet", so then I tried the one downstairs by the tv and it worked. This means my office/gaming room is now on a wifi connection. I don't want to try to run an Ethernet cable from downstairs to my office. Since there's already a Cable Outlet in my office, is it possible to have it activated and connect some kind of adapter to it so that the same service/IP address is split and shared with upstairs and downstairs? WouldMoCA Network Adapters work for this? Would I need COX to activate the upstairs outlet? P.S. I'm aware of COX wifi pods and port forwarding as other ways to improve my upstairs connection. This post is to explore options for utilizing the currently inactive cable outlet upstairs in conjunction with the downstairs cable outlet.
CINTRON 5 years ago Place Internet
9.3KViews
0likes
3Comments
modem logs showing issues maybe?
https://imgur.com/a/bftJQC2
PlotsTechMedia 6 years ago Place Internet
890Views
0likes
1Comment
xbox one disconnects from wired connection
i have my xbox one wired to the router/modem...numerous times when I log on it will say that it is not connected to the internet. I resovle the issue simply by power cycling the modem. Any advice on why it will disconnect and how to stop it from happening thanks
galbria 9 years ago Place Archives
1.9KViews
0likes
1Comment