tivo tuning adapter

2 Topics

TIVO Tuning Adaptor spontaneous restart/reboot
For the past two months, the two Cisco Tuning Adaptors associated with my two TIVO's have been restarting by themselves. For a while they were synchronized i.e. they both rebooted at the same time. Now they both have a mind of their own. Every time a TA restarts, the TIVO gives up on any recordings and interrupts any viewing with messages about the TA. You get a second message once the TA restarts, also with terminated recordings. Reboot time varies a lot. Sometimes a couple times a day, sometimes 2 or 3 times a week. Often during the 4th quarter of a Suns or Warriors basket ball game. This is getting old. Cox has been out 4 times. Replaced both tuning adaptors and cable cards. No change. They have blamed it on noise issues, aka ingress (first guy). In house cabling - second guy who replaced every connector he could find. No change. Third guy blamed my amplifier and installed his own. Fourth guy blamed the amplifier installed by the third guy. He replaced it with a mid split amplifier. No change. Problem remains with no significant change. Very difficult to test since it takes between 12 and 36 hours for a TA to reboot on its own. Guy number 5 is now scheduled to come out.Perhaps hewill have better luck. My head is spinning. Smells like a head end issue to me. Is it just coincidence that these problems began with the death of the 1000 series channels, increased modem speed and the death of VOD? And just today, they have suddenly been rebooting in synchronization. Three times so far. Both rebooted within seconds of one another.... Any suggestions would be appreciated.
Solved
LongTime_TIVO_U 2 years ago Place TV
13KViews
0likes
100Comments
tuning adapter and new cable drop being run
So my living room tuning adapter didn't want to connect to my TiVo. We tried four tuning adapters then the Cox rep made a temporary drop from the outside tap into my living room and it immediately connected. They want to run a brand new line to my living room, which is quite a project. He mentioned to the person making the appointment it's not a normal 6 point drop and it's a 24 point drop. No clue what all that stuff means. Anyway should I let COX run the line or hire someone that might do a better job? I don't want lots of wires running all over my house. It needs run from the main box on the left side of my house all the way to the right side of my house. It's a two story so no attic access. I just don't want a crappy job. Your thoughts? Don
ArizonaDon 3 years ago Place TV
248Views
0likes
0Comments