ssh

4 Topics

How do I get port forwarding to work on my Cisco DPC3825
I have set up port forwarding per the instructions on my CiscoDPC3825. I can't seem to get it to work. It seems fairly straight forward, This is what I have; External Internal Start Port End Port IP Address Start Port End Port Protocol Enable 22 22 192.168.1.10 22 22 TCPUDPBoth X to to TCPUDPBoth
Solved
Mark_S_
12 years ago Place Archives
11KViews
0likes
11Comments
DPC3825 router/modem combo unable to port forward fully
I have the DPC3825 router/modem combo. I use it for both hard wired and wireless connections. I want to SSH, remote in, on port 22 to a small linux machine I have. I have a another linux machine that when I plug it into the combo unit it automatically opens up port 22 and I can access it from outside my LAN network. The port is not opened on the combo unit either. So I plugged in my other linux unit, set it up properly (from what I know) and can't SSH into it. I then opened the port up and still can't SSH into the new linux unit. It does not make sense to me how my first linux box can be accessed outside the network with no ports forwarded on my combo unit. Any advice on what I can do? Further, can I go to my local cox store and switch out my combo unit I received from them and get just a modem with no wifi? Thanks!
nashsclay
9 years ago Place Archives
2.4KViews
0likes
4Comments
Port forwarding for SSH or remote access?
Hows it going all. Been seeing quite a few people complaining about the switch that happened with port forwarding. I'm attempting to SSH into a raspberry pi from a completely separate network, and every time i port forward the raspi, the port never opens on the router (tested with telnet andhttps://www.yougetsignal.com/tools/open-ports/) I went in (to the app COX support, because you blocked the firmware option that made it simple and easy), and selected the raspi, told it the port i wanted forwarded, and saved it. I can now view it, and look at it, but not use it apparently? Any ideas anyone? I've tried PuTTy and just ssh through cmd/powershell.
vnldwth
4 years ago Place Internet
1.1KViews
0likes
1Comment
SCP/SSH Transfer Speeds Slow
I have tested my Cox residential connection via speed tests and get near the advertised speeds (150MB/s down, 10MB/s up) on the Cox website and via my Ubiquiti router management application. I need to use kerberos enabled scp and ssh to transfer files to a remote server, but the transfer speeds are <500KB/sec in real world tests. Has anyone seen this issue? Is VPN a solution? Thanks B
Booger
5 years ago Place Internet
399Views
0likes
0Comments