No internet for 5 days or the connection goes in and out
No one seems to be able to assist. I have tried through the web and the app with resets. I went and bought and picked up new things including their modem, talked to 10 different agents who use the same troubleshooting and telling me to do the same steps I’ve already done. Telling me everything looks fine on their end. What’s funny but not funny about that is, I then received a text from them separately saying there’s an outage in my area. Next was: Cox: Thanks for signing up to receive outage text updates. We're working on it, and expect you to be reconnected by 05:01AM. We'll continue to send updates as they're available. Next was: Cox: The outage in your area is resolved. We'll continue to closely monitor our network. Please let us know if your services are working. Reply "YES" if your service is up and running. Reply "NO" or "Unsure" if you're still having an issue. I say no. Then:We're sorry to see you're having trouble connecting. Please visit https://cox.com/smarthelp to troubleshoot the issue and get back up and running. Then:Cox: Your reset was unsuccessful. Try unplugging the power & plugging it back in. This can take up to 10 min. Then:Cox: It's been 3 days since the outage in your area was resolved, and we're checking to make sure your service is still running smoothly. Reply "YES" if you can connect without issues. Reply "NO" or "Unsure" if you’re still having trouble. I say NO again. Then: We're sorry to see you're having trouble connecting. Please visit https://cox.com/smarthelp to troubleshoot the issue and get back up and running. Now I’m highly annoyed because all these days have passed. I decide to txt AGENT for the 10th and final time. Same troubleshooting steps I already told them I’m tired of doing. Cox: Verify the Coax Cable is Connected into the Cable Port on the Box. Verify Coax Cable is connected to the wall outlet. Ensure all connections between the wall and the equipment are not loose or damaged. Me:I’ve reset, unplugged, plugged back, reset again, unscrewed cords, screwed them back in.It can’t be the modem, router, coax cords, Ethernet cords, power cords, nothing. I got all new stuff yesterday and a new modem from cox 3 days ago.My WiFi worked for 45 minutes today and then gone.I’ve troubleshoot everything, check cords, got a new modem, new router, etc.I’ve been without internet for 5 days.I’ve talked to ten agents.Then I was told there’s an outage in my area AFTER being told there wasn’t Then I’m told-Thank you so much for this confirmation, there are no outages reported in your area at this moment, in this case please allow me to reboot your device in order to clean up your line for any cache or excess of data and check the status of your modem, if the steps we follow don't fix the issue we will schedule a tech visit. 😑 did it, still nope. Next was:Thank you so much for following these steps with me today. I know how important it is for you to get everything working again, it seems like a tech visit needs to be done in order to sort this out for you, the visit would have a $75 potential charge (if the cause of the issue is Cox's responsibility charge won't be applied) I’m like at this point, y’all should’ve came out to the residents affected that are still having troubles because why would they lie 😑😑😑 Anybody else encounter this mess?2.9KViews2likes8CommentsCox Panoramic Wifi No 5ghz Band
Hello. Today I noticed some of my devices got disconnected from my wifi network. Upon further investigation, all of those devices were on the 5ghz band, so I looked to check my network and noticed the 5ghz wifi name was changed to the same name as the 2.4ghz band. What's really weird (and frustrating I might add) is that I can no longer edit the wifi settings because Cox blocked them. Why is this and how can I get back into my 5ghz band?2.9KViews0likes3Comments'Access point temporarily full' on 2.4GHz
I'm having exactly the same problem as described in this post:https://forums.cox.com/forum_home/internet_forum/f/internet-forum/27687/access-point-temporarily-full-on-2-4ghz-is-there-a-limit-of-connected-devices/108616 Unfortunately, that post has been 'locked' (what's the point of that?!) and no solution has been posted. I have numerous smarthome devices, a good 40 of them, connected to my 2.4GHz wifi network, but there's always at least one that can't connect. When I try to connect my phone, it says 'Access point temporarily full'. I had pretty much the same set of lights, thermostats, fans and switches at the previous place I lived, and that had no problem. Research shows that wifi networks normally support up to 256 connections at once, and I have nowhere near that number of devices. But my Cox Panoramic access point seems to have some kind of limit, and I can't find a setting to change it. I can connect my phone to the 5GHz network, but not the smart devices; they just don't do that, which is why I turned on a separate 2.4GHz network, as much as the Cox app urged me not to. Any ideas how to fix this? Some 'advanced' setting hidden somewhere? The Cox app is generally pretty convenient, but it's frustrating the way some settings are so convoluted, probably in a misguided effort to dumb it down.3.1KViews0likes4CommentsAccess point temporarily full on 2.4ghz. Is there a limit of connected devices?
I have multiple items on my network: thermostats, cameras, lights, etc. all use 2.4GHz connection switching to 5GHz isn't an option. Is there a limit to the number of devices I can have on my network? They don't access the internet consistently but do need connect from time to time which doesn't allow anyone else to use the connection they keep getting the access point temporarily full error message....full of what????5.9KViews1like5Comments2.4 ghz signal is not detected by any device.
I have a Cox dual-band router (brand new), but only the 5 ghz (5G) signal is detectable. None of my devices detects the 2.4 ghz spectrum signal -- it does not show up in the list of available networks. I have two devices (a laptop and a Roku) that are not 5G compatible, so I need to use the 2.4 ghz signal with those. On the router, the lights flash for both. Rebooted both the router and the Roku multiple times, but that did not solve the problem. The representative on the Cox website "Chat" had no other ideas.15KViews0likes3Comments