dewwby
New Contributor
Joined 6 years ago
User Profile
User Widgets
Contributions
Straight up lie about the Panoramic WIFi Modem by Technicolor
So trying to hook up Ethernet port two. No go. Login to modem admin and look under hardware>LAN and it says that port 2 is inactive then has a check box to dedicate to home security (but it will no longer show on the home network). Try 3 techs who send a "hit" to the modem to activate the port. Finally get escalated to a tech who says I dont think it can be activated. So why in the name of all that is holy does Cox proudly advertise the below on the site (straight up false advertising). Anyone able to get both Ethernet LAN ports working??? Considering getting a Netgear CM1200 and just running 2 WiFi routers at either end of the house which would be hardwired into the Netgear as that model is not WiFi. Panoramic Wifi Gateway (Technicolor CGM4141) DOCSIS 3.1 compliant IPv4/IPv6 router 802.11n 2.4 GHz/802.11ac 5 GHz dual band technology 32x8 channel bonding PacketCable 2.0 eDVA 2 port Gigabit Ethernet switch with advanced routing capability Internal power supply and optional battery backup (24 hours or 8 hours) he Technicolor CGM4141 has the following ports and buttons. TEL 1 / TEL 2 - Connects to home telephone wiring and to conventional telephones or fax machines. TEL 1 is used for the first line of phone service and TEL 2 is for a second line of service. ETHERNET - Two ports are available to connect to the 10/100/1000 Ethernet ports on your computer or other device. It is recommended that devices be hardwired if possible. RESET - This is recessed to prevent accidental resets and is used to restore all settings to factory defaults. Factory resets result in the loss of all settings. To restore factory defaults, press and hold the indented Reset button for more than 10 seconds or until the front panel LED flashes. CABLE - Connects the coax cable to the cable wall outlet. POWER - Connects the power cord to the modem. WPS - Located on the top of the modem, this button can be used instead of entering the WiFi password to connect wireless devices that support WPS to the Technicolor CGM4141. WPS works only for wireless networks that use a password that is encrypted with the WPA Personal or WPA2 Personal security protocols. MAC Address and Network Name (SSID) Click to enlarge. MAC addresses are written as 12 digits containing both letters and numbers (0-9, A-F). A MAC address is unique. The first six characters of the MAC address are unique to the manufacturer of the device. Notes: The SSID and password listed on the bottom of the device are only used to connect to the modem during the initial install or after a factory reset. Technicolor recommends that a single Network Name (SSID) is used for the CGM4141 because the modem automatically chooses the best network for each connected device. Ensure all WiFi-ready devices recognize the single Network Name (SSID).23KViews0likes4Comments