Read the forum guidelines
Recent notice in bill indicated Preferred had been increased to 150 Mbps down and that modem reset was all that was needed.
Many power down resets later and still only getting low 90’s Mbps down and low 9’s up same as previous. Called tech support and chances made to account and reset from they’re end, was told it should work later after system update was complete. Day later and several modem reboots later still same low 90’s Mbps. All tests have been on wired connection to PC, not a WIFI connection.
Wondering if there’s something I’m missing on my end?
Arris Surfboard SB6141 modem. (literature indicates 343 Mbps max)
Netgear61 mod. WNDR3400v3 router (rated 300 Mbps)
Ethernet cat.5e wires
Modem signal - signal to noise 37-38 dB all 8 down channels
(Eliminated router) Straight wired connection from modem to PC reboot of both, no change.
Redid all connections and modem reboot, no change.
Anybody have idea what might be wrong or am I just one of unlucky ones that doesn’t get the increase?
That router has a 100Mbps WAN port, which is going to limit your speed. I know you said you bypassed it, but FYI.
don426 said:Modem signal - signal to noise 37-38 dB all 8 down channels
Can you post your complete signals? The SNR levels are most important.
Channel ID 33 34 35 36 37 38 39 40 Frequency 345000000 Hz 351000000 Hz 357000000 Hz 363000000 Hz 369000000 Hz 375000000 Hz 381000000 Hz 387000000 Hz Signal to Noise Ratio 37 dB 37 dB 38 dB 37 dB 38 dB 38 dB 37 dB 37 dB Downstream Modulation QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 QAM256 Power LevelThe Downstream Power Level reading is a snapshot taken at the time this page was requested. Please Reload/Refresh this Page for a new reading -8 dBmV -8 dBmV -7 dBmV -8 dBmV -8 dBmV -8 dBmV -9 dBmV -8 dBmV
Channel ID 4 3 2 1 Frequency 38400000 Hz 32000000 Hz 25600000 Hz 19100000 Hz Ranging Service ID 4666 4666 4666 4666 Symbol Rate 5.120 Msym/sec 5.120 Msym/sec 5.120 Msym/sec 5.120 Msym/sec Power Level 47 dBmV 47 dBmV 47 dBmV 45 dBmV Upstream Modulation  16QAM 64QAM  16QAM 64QAM  16QAM 64QAM  16QAM 64QAM Ranging Status Success Success Success Success
I hope you can make this out, wrapping of copy/paste kind of scrambles.
WiderMouthOpen said:That router has a 100Mbps WAN port, which is going to limit your speed. I know you said you bypassed it, but FYI.
That’s good information; I guess I’m just locked in at less than 100 Mbps for more than one reason.
Thanks for your input!