Once again Bruce, you've been great!
Have you disconnected the optical and analog cables to test HDMI?
Yes, still nothing.
I'd turn off AnyNET to test HDMI. Sometimes CEC creates more problems than it's worth.
Done that, no dice.
However, as a complete stab in the dark with AnyNET, is your SB listed in the AnyNET Device List? If so, any audio options?
Yes, and it identifies the SB as a "Receiver". -- but no options under AnyNET as far as a device with additional options -- like my BluRay or Game Console and etc. -- which both display additional options under AnyNET.
Ensure the version of your HDMI cable matches at least the HDMI version of the TV.
Yes, I did try that, assuming an older HDMI cable may do the trick -- which I have on an old HDMI VHS-DVD combo player that I have. But still no dice.
FYI: the SB did come with it's own HDMI cable, so I tested that one also...
Plus I also tested an old model optical cable, plus a brand new one when getting this soundbar.
Disable Anynet?
I tried that also, still no cigar.
-----
Yes, I've tried almost everything, except crack open the SB and hot-wire it myself. lol
Of course, my other alternatives are to either upgrade to a newer TV that supports HDMI-ARC or replace the SB with a compatible / supported brand. -- But there is the issue with the latter, I prefer the SB to have a wired subwoofer -- in the past, I've gone through issues with wireless subwoofer setups. And it's difficult to find a new model SB (by a popular brand) with wired subwoofer option -- they are rare.
I'll later see if I can contact the devs of the contour box. I'm pretty sure if I give the above codes to someone that knows what to do with them, this issue should be solved and they start providing support for this SB on the Contour box -- or I keep firing away with my double-shooters.
My bad. I guess you can adjust volume to a soundbar via HDMI-ARC. I thought ARC just stripped off the audio data and sent to another component.
According to a user review on Amazon...
By m.pi on July 9, 2021 "I was hoping to get me Cable Box remote to program for the sound-bar, but could not find a code. Ended up using the ARC HDMI port on my TV to connect to the sound-bar and set my TV to control receiver volume, now I am back to using just 1 remote."
Also, according to an article on Reliance Digital...
"Using HDMI-ARC, you can also control the volume of HDMI-ARC connected devices using your TV remote. You not only cut down on the number of wires but also on remotes which de-clutters a lot of things."
My bad. I guess you can adjust volume to a soundbar via HDMI-ARC. I thought ARC just stripped off the audio data and sent to another component.
Yes, that is what I'm counting on. Let the HDTV (that supports HDMI-ARC) just use the SB as an extension of itself. So when I use the XR-11 to adjust the volume or press the mute feature, the TV will know to relay that info to the SB. And when I power off the TV, it should also turn off the SB.
The only downside of using HDMI-ARC is that most new TVs only offer that to a single HDMI jack. Unlike CEC, its available to all the HDMI jacks -- as long as the device knows that lingo. ;-) -- So it would only be used for the SB and nothing else -- from what it seems.
A TV only needs 1 HDMI-ARC port.
If all your AV components...cable-box, Blu-ray player, game console, streamer, media server, VCR...are connected to the TV, the TV controls all AV signals. If the TV controls all AV signals, the TV only needs 1 port to send audio to 1 higher-end audio component, such as an AVR or SB. Most AV setups only have 1 higher-end audio component. I don't know why a TV would need another ARC.
HDMI-CEC is another animal. If a CEC component detects an input...such as inserting a disc into a DVD player...CEC would automatically power the TV. If you change HDMI Input on the TV, the TV would power the selected component. It's just HDMI ports communicating with each other.
CEC is okay and it's supposed to be a standardized protocol, but sometimes all this cross-talking between different brands creates more problems than it's worth. Most cable-boxes...if any...don't support it.
There is a newer, better version of HDMI-ARC: HDMI-eARC. Instead of the TV processing the audio signal, eARC keeps the signal raw to allow the higher-end audio component to decode the audio, such as TrueHD, Atmos, DTS-HD, etc.
