Forum Discussion
Check your modem logs and post the results. Also post your signals. If you have T3 timeouts in the logs then it's most likely a Cox problem assuming you've checked connections and changed your interior cables. The first few minutes after rebooting your modem don't count, but after that you should not be getting any T3 timeouts.
- RNJustis5 years agoNew Contributor
I do indeed have T3 timeouts in my logs, and not just from restarts. I also set up a new modem today, so every piece of hardware and cable except for in my crawl space has been eliminated as a possibility.
How do I get Cox to fix this?
- Allan5 years agoModerator@RNJustis, Do you have any splitters or signal amps on the cable line going to the modem? -Allan, Cox Support Forums Moderator
- RNJustis5 years agoNew Contributor
Neither as far as I can tell. I can get into the crawl space tomorrow, there may be a splitter down there.
- Dave95 years agoContributor III
The T3 timeout indicates that there was a failure in the upstream data transmission, usually caused by noise on the line. If you've checked all of your equipment then you need to have a Cox tech troubleshoot further.
Related Content
- 12 years ago
- 11 months ago