Welcome to the Cox Community
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
Messages
Selected Messages
New Contributor II
•
Contour remote lags
I recently switched to Cox from a satellite provider. I wish I hadn't. The delay and lag using the contour system is horrendous. You have to press the buttons on the remote several times, wait between presses, and at times the remote send to almost freeze. I don't need a record to talk to. There is a serious issue with the remote or the operating system software.
Trying to watch a recorded show and using the fast forward option is a complete joke with the contour system.
I'm just about ready to go back to what I had. I have replaced the remote, checked the cables, and spoken to tech support multiple times.
Let's get this issue fixed Cox. Seems to be a major problem
bearone2
Contributor III
•
change batteries!
2
0
CurtB
+4 more
Honored Contributor
•
A delay in processing Contour2 remote button pushes has been discussed in previous threads. Several possible causes were discussed.
Perform these steps to Troubleshoot Contour 2 Remote Issues.
If you're still having delays with the remote after performing troubleshooting procedures, your issue may be a poor signal. You should email Cox at cox.help@cox.com. Include your full name and your full service address along with a link to this thread. They should be able to help you.
0
0
LisaH
Moderator
•
0
0
ekhawaii
Contributor
•
Almostsane1....I have 2 Contour2 DVRs connected to a Sony and Samsung TV. The remotes to both work within a second or two of pressing. As CurtB pointed out, the links he posted and others have discussed some solutions and issues. There have been times, previously for me, when the response was terrible...like 10 or more seconds, but response returned to Good a few hours or maybe a day. I believe that COX on their side makes a fix. If it persists, email or give them a call.
I have the voice activated Remote (XR11-RF, version 1.-) paired with a XG1-A DVR (2pbm Record). This is unit is not Wireless. The fast fwd/bck works on previously recorded shows, and I was able to make the page up/down buttons to do a 30sec/15sec jump (there are links in this forum for this great feature). Also, if you go to the Gear Settings, scroll to About...you will see the Remote battery level shown and the version of firmware...mine is 107.00, dated 1/6/20 at 8:55am. This was at 106.1.1 on 12/10/19...so COX does update, of course, you never get any indication as to when unless you check.
Finally, LisaH implied you need a direct line of sight...I find that I can work the remote while it is behind my back....but probably within a reasonable distance. Don't give up!
0
0
Bruce
+4 more
Honored Contributor III
•
The delay/lag is annoying but eventually goes away.
I connected Contour in Spring-19 and there was no sluggishness with the remote. About 6 months later (Oct), however, it started responding like Jell-O. I shared on the Forum but Cox had no expertise.
https://forums.cox.com/forum_home/phone_forum/f/phone-forum/24075/call-history/92742#92742
My guess is Contour is either installing an update or CRC-ing after an update. This mysterious process lasted 2-3 days and eventually cleared. Then 10 days later, the sluggishness returned and lasted another 2-3 days. Again, it eventually cleared and I haven't experienced it in 4 months.
Again, best guess, it's a once or twice process which eventually completes. Kinda like a Windows Service Pack update.
6
0