Cox is throttling speeds of DOCSIS 3.0 modems
I used tohave250-350Mbps down 2 years ago but Cox has throttled down some older DOCSIS 3.0 modems to only have access to the essential 150mbps speed. If Cox didn't have a monopoly on internet service providers in my area I'd switch ASAP. Probably just trying to sell more of their junk modem rentals to unwitting customers and take advantage of their lack of knowledge.
Not receiving DOCSIS 3.1
Up until last week my ARRIS SB8200 was receiving DOCSIS 3.1, indicated by the blue lights on the front of the modem. Directly wired in I was pulling 900-940 mbps down. Those lights are now lit green, representing DOCSIS 3.0, and I’m now limited to 500-550 mbps. I’ve tried numerous resets and even bought a second SB8200 to test, same issue I have had no changes to the coax line and I am not using a splitter. Looking for suggestions, hoping to avoid the $75 charge to have someone out to my home if at all possible.Data Harvesting & Devices w/uPnP IP addy
When I see the proof of this Orwellian ** in my router logs, I wonder what the hell is going on...? So...what? How?? and Why??! And dude, what the hell is up with this strange 192.168.147.100 existence? Why can't I check it out and see what is on the page...if there is anything to see...? I'm curious. Lastly, thirdly, what is the difference between the DOCSIS/Ethernet choice given in the GUI?
Arris SB8200 Docsis 3.1 GigaBlast No Blue Lights Up or Down
Called Cox for new internet options. Told me I was grandfathered in at 150. Quoted me 300 and Giga. Call ended. I had a Netgear 3.0 modem / router combo that worked fine. I buy a 3.0 modem and a mesh router to increase my WIFI area. I try to get it calibrated only to find out I have a work order for GigaBlast speeds and my 3.0 equipment is unusable. So as a patient person I go and swap my 3.0 for a 3.1 modem costing me more money. I call to get the 3.1 calibrated by Cox and it shows all green lights 3.0, no blue lights for Arris SB8200 Docsis 3.1 GigaBlast No Blue Lights Up or Down. Speeds are 250 down and 20 up and that is before and after a modem factory reset with ONLY my laptop plugged in. Tried with a desktop as well with the same result. - Called and asked was GiagBlast and Docsis 3.1 avilable in my area and told it was - Forced to GigaBlast without request and told I can't return to my original speed - Asked me to upgrade my equipment to take advantage of GigaBlast but when equipment is installed it I only get 3.0 and low speeds - Called from 10am to Midnight and text chat too. After dealing with 6 different people and a whole day wasted I still got nowhere - Best of all I was told no work could be done while there was an "outage" in my area. One that lasted from 2pm to 7pm, and then another that started at 12am forecast to end at 6am. Anybody else have these issues and if so how were they resolved??? - Do yourself a favor and DO NOT, I repeat DO NOT engage in the text chat option from your phone. A waste of time and resources!!!! Similar situations like mine so I know I am not alone when it comes to the level of customer service andtechnical support https://forums.cox.com/forum_home/internet_forum/f/internet-forum/22627/gigablast-activation/86619#86619 https://forums.cox.com/forum_home/internet_forum/f/internet-forum/20283/issues-with-gigablast Standard Specification Compliant Docsis 3.1 Hardware Version 4 Software Version D31CM-PEREGRINE-1.1.1.0-GA-14-NOSH Connection The status listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem. Startup Procedure Procedure Status Comment Acquire Downstream Channel 957000000 Hz Locked Connectivity State OK Operational Boot State OK Operational Configuration File OK Security Enabled BPI+ DOCSIS Network Access Enabled Allowed Downstream Bonded Channels Channel ID Lock Status Modulation Frequency Power SNR/MER Corrected Uncorrectables 30 Locked QAM256 957000000 Hz 2.6 dBmV 37.3 dB 103 482 1 Locked QAM256 783000000 Hz 1.3 dBmV 37.9 dB 0 0 2 Locked QAM256 789000000 Hz 1.3 dBmV 37.9 dB 0 0 3 Locked QAM256 795000000 Hz 1.4 dBmV 37.8 dB 0 0 4 Locked QAM256 801000000 Hz 1.3 dBmV 37.9 dB 0 0 9 Locked QAM256 831000000 Hz 1.2 dBmV 37.7 dB 0 0 10 Locked QAM256 837000000 Hz 1.6 dBmV 37.8 dB 0 0 11 Locked QAM256 843000000 Hz 1.6 dBmV 37.9 dB 0 0 12 Locked QAM256 849000000 Hz 1.7 dBmV 37.8 dB 0 0 17 Locked QAM256 879000000 Hz 1.9 dBmV 37.5 dB 0 0 18 Locked QAM256 885000000 Hz 1.7 dBmV 37.3 dB 0 0 19 Locked QAM256 891000000 Hz 1.8 dBmV 37.4 dB 0 0 20 Locked QAM256 897000000 Hz 1.7 dBmV 37.3 dB 0 0 21 Locked QAM256 903000000 Hz 1.5 dBmV 37.2 dB 0 0 22 Locked QAM256 909000000 Hz 1.6 dBmV 37.1 dB 0 0 25 Locked QAM256 927000000 Hz 2.3 dBmV 37.3 dB 0 0 26 Locked QAM256 933000000 Hz 2.7 dBmV 37.4 dB 0 0 27 Locked QAM256 939000000 Hz 2.9 dBmV 37.4 dB 0 0 28 Locked QAM256 945000000 Hz 2.8 dBmV 37.3 dB 0 0 29 Locked QAM256 951000000 Hz 2.8 dBmV 37.4 dB 0 0 33 Not Locked Unknown 357000000 Hz -46.1 dBmV 0.0 dB 0 0 34 Not Locked Unknown 363000000 Hz -45.9 dBmV 0.0 dB 0 0 35 Not Locked Unknown 369000000 Hz -45.9 dBmV 0.0 dB 0 0 36 Not Locked Unknown 375000000 Hz -45.8 dBmV 0.0 dB 0 0 37 Not Locked Unknown 381000000 Hz -45.7 dBmV 0.0 dB 0 0 38 Not Locked Unknown 387000000 Hz -45.5 dBmV 0.0 dB 0 0 41 Not Locked Unknown 405000000 Hz -45.8 dBmV 0.0 dB 0 0 42 Not Locked Unknown 411000000 Hz -46.0 dBmV 0.0 dB 0 0 43 Not Locked Unknown 417000000 Hz -46.5 dBmV 0.0 dB 0 0 44 Not Locked Unknown 423000000 Hz -47.2 dBmV 0.0 dB 0 0 45 Not Locked Unknown 429000000 Hz -47.8 dBmV 0.0 dB 0 0 46 Not Locked Unknown 435000000 Hz -48.3 dBmV 0.0 dB 0 0 159 Locked Other 300000000 Hz -47.2 dBmV 0.0 dB 0 0 Upstream Bonded Channels Channel Channel ID Lock Status US Channel Type Frequency Width Power 1 1 Locked SC-QAM 16900000 Hz 6400000 Hz 40.0 dBmV 2 2 Locked SC-QAM 23500000 Hz 6400000 Hz 41.0 dBmV 3 3 Locked SC-QAM 29900000 Hz 6400000 Hz 42.0 dBmV 4 4 Locked SC-QAM 36300000 Hz 6400000 Hz 42.0 dBmV Current System Time:Tue Apr 16 01:05:19 2019
My docsis 3.0 router supports 340mbps, rented routers are a scam.
I placed an upgrade order for the internet ultimate, I noticed it has been processing for about 8 days, so I talked to a chat rep who told me my router isn't compatible with my upgrade to the internet ultimate, she claimed that my modem router only supports up to 150mbps wireless due to it being docsis 3.0 and I'll have to rent a new one through Cox. I explained to her that my modem router actually supports up to 340mbps wireless and 1gbps wired, and that I mainly use the wired service, I even offered to link her the specifications listed by the manufacturer to prove this to her, she ignored this and told me they cannot do it. I asked for a supervisor, sheasked me to wait then disconnected on me. I'm not paying for a modem router that will not benefit me in anyway when I know my modem router is more than enough.
