Forum Discussion

bjbarbero's avatar
bjbarbero
New Contributor
10 months ago

Screen jitters, cuts out, and/or freezes

We have two TVs (garage and family room) with both running Cox model AX061AEl Contour boxes. No problems with the garage box. However, family room box is driving me crazy with multiple problems that ...
  • bjbarbero's avatar
    bjbarbero
    9 months ago

    Thanks for your reply. Thought about it hard and decided to redo my diagnostics with the added step of moving the garage TV and Contour box into the family room and watching the same programs on both TVs at the same time.

    With this in place, I found that only the main TV experienced lock-up, sound, and controller issues. I checked installation of the two sets and determined that the only significant difference was that when I had installed the garage TV, I used a third-party HDMI 2.1 cable that came with the TV instead of the Cox cable supplied with the Contour box.

    I again replaced the HDMI cable to the main TV set, only this time, instead of using the Cox provided cable, I purchased and installed a certified HDMI 2.1 cable from a third-party. In the 14 days since I installed the certified HDMI 2.1 cable there have been no instances of freezing, sound problems, or inability to respond to controller demands. Basicaaly everything was fixed except for a very occasional jitter. A well spent $15.

    With the main problem dealt with I attempted to track down the cause of the remaining occasional jitters which still appeared on both TVs. In diagnosing this, I found that during replay of recorded shows where I had had a problem the jitter had embedded itself into the recorded and played back on both TVs and desktop computer. Doing an instant replay of a live program where the jitter appeared also showed the jitter on both TVs.

    Since the jitters can be recorded and the DVR and instant playback functions have nothing to do with anything on my side of the demarc line, they are clearly Cox dependent. I’ll forego calling in a Cox Technician to sit around waiting for a jitter manifestation and I’ll just live with the occasional twitch.

CurtB's avatar
CurtB
Valued Contributor III

The symptoms you describe occur with a signal issue.  The fact it only applies to one box indicates an issue with your internal wiring between the demarc and TV in family room, rather than the Cox mainline.  However, the signal issue appears to be intermittent.  If you primarily use the TV in the living room, it's possible you just haven't had the signal issue while watching the TV in the garage.  While having issues with the living room TV, check the garage TV to see if it occurs there too.  You should schedule a tech visit to check your signal.  If you have Cox Complete Care, repairs will be covered.  Otherwise, Cox will charge for the service call if the issue is with your internal wiring.  

bjbarbero's avatar
bjbarbero
New Contributor
9 months ago

Thanks for your reply. Thought about it hard and decided to redo my diagnostics with the added step of moving the garage TV and Contour box into the family room and watching the same programs on both TVs at the same time.

With this in place, I found that only the main TV experienced lock-up, sound, and controller issues. I checked installation of the two sets and determined that the only significant difference was that when I had installed the garage TV, I used a third-party HDMI 2.1 cable that came with the TV instead of the Cox cable supplied with the Contour box.

I again replaced the HDMI cable to the main TV set, only this time, instead of using the Cox provided cable, I purchased and installed a certified HDMI 2.1 cable from a third-party. In the 14 days since I installed the certified HDMI 2.1 cable there have been no instances of freezing, sound problems, or inability to respond to controller demands. Basicaaly everything was fixed except for a very occasional jitter. A well spent $15.

With the main problem dealt with I attempted to track down the cause of the remaining occasional jitters which still appeared on both TVs. In diagnosing this, I found that during replay of recorded shows where I had had a problem the jitter had embedded itself into the recorded and played back on both TVs and desktop computer. Doing an instant replay of a live program where the jitter appeared also showed the jitter on both TVs.

Since the jitters can be recorded and the DVR and instant playback functions have nothing to do with anything on my side of the demarc line, they are clearly Cox dependent. I’ll forego calling in a Cox Technician to sit around waiting for a jitter manifestation and I’ll just live with the occasional twitch.