Forum Discussion

Karen_Newhouse's avatar
Karen_Newhouse
New Contributor
4 years ago

URC 8820 remote control does not support Denon receiver AVR-X1600H

This is a 2019 model Denon.  I cannot get it to turn off and on with the Cox remote control.  It's the 3rd receiver we've had.  Both of the others worked fine with the Cox remote control.  
Bruce's avatar
Bruce
Honored Contributor III
4 years ago

My bad...OP did provide the remote.

I found a few codes...

Denon
1360
1460
2134
2279
2516
2706
2820
2857
3347
3380

  • Karen_Newhouse's avatar
    Karen_Newhouse
    New Contributor
    4 years ago

    2134 is the correct number, but the receiver switches to tuner mode when powered on.

    • Bruce's avatar
      Bruce
      Honored Contributor III
      4 years ago

      To be honest, I'm unsure which "receiver" is new:  the cable-box or the Denon.

      If the Denon is new, this would be an initial setup and we can work through this.  If it's another cable-box, it's usually the authentication within the daisy-chain of HDMI cables causing an issue.

      Which receiver is the new device?

      • Karen_Newhouse's avatar
        Karen_Newhouse
        New Contributor
        4 years ago

        It's the Denon that's new.  I missed code 3136.  That does work slightly better.  The TV volume needs to kick in when the receiver is off.