Forum Discussion

Forge's avatar
Forge
New Contributor
4 years ago

Here's a pivot table with some simplified logged issues to see the magnitude.. This is what I captured since September 1, 2021...

Priority > Description Count
Notice (6) 787
   CM-STATUS message sent. Event Type Code: 16; Chan ID: 159 402
   CM-STATUS message sent. Event Type Code: 24; Chan ID: 159 352
   CM-STATUS message sent. Event Type Code: 22; Chan ID: 159 11
   CM-STATUS message sent. Event Type Code: 20; Chan ID: 159 10
   TLV-11 - unrecognized OID 3
   Honoring MDD; IP provisioning mode = IPv4 3
   DS profile assignment change. DS Chan ID: 32; Previous Profile: ; New Profile: 1 2 3. 3
   CM-STATUS message sent. Event Type Code: 3; Chan ID: N/A; DSID: ?; MAC Addr: N/A 1
   CM-STATUS message sent. Event Type Code: 4; Chan ID: 159 1
   CM-STATUS message sent. Event Type Code: 1; Chan ID: 159 1
Warning (5) 462
   Dynamic Range Window violation 230
   RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW 123
   RNG-RSP CCAP Commanded Power Exceeds Value Corresponding to the Top of the DRW 103
   DHCP WARNING - Non-critical field invalid in response  3
   Unicast DSID PSN startup error 1
   ToD request sent- No Response received 1
   MDD message timeout 1
Critical (3) 222
   Started Unicast Maintenance Ranging - No Response received - T3 time-out 167
   No Ranging Response received - T3 time-out 21
   Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out 15
   Unicast Ranging Received Abort Response - Re-initializing MAC 8
   SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing 4
   No Maintenance Broadcasts for Ranging opportunities received - T2 time-out 3
   SYNC Timing Synchronization failure - Loss of Sync 3
   SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;CM-MAC=6c:cd:d6:7e:8c:04 1
Error (4) 4
   DHCP RENEW WARNING - Field invalid in response v4 option 4
Grand Total 1475