New Netgear cm600 only bonding on 16 channels
Signals seem ok no noticeable errors. On preferred 100 just switched from preferred 50. Just bonds to 16 channels even after reset or reboot. Thought there where 32 channel bonding now so 24 should w...
Forum Discussion
Skipped today's logs as I was rebooting. Just got modem on 3/26. In Glendale, AZ.
| 2018-04-03, 21:26:09 | Critical (3) | Started Unicast Maintenance Ranging - No Response received - T3 time-out; |
| 2018-04-02, 09:47:35 | Critical (3) | Started Unicast Maintenance Ranging - No Response received - T3 time-out; |
| 2018-03-27, 02:10:03 | Critical (3) | Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;; |
| 2018-03-27, 00:12:34 | Critical (3) | Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out; |
| 2018-03-26, 17:26:52 | Critical (3) | Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out; |
| 2018-03-26, 16:56:00 | Critical (3) | Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out; |
| 2018-03-26, 11:58:26 | Critical (3) | SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing; |
| 2018-03-26, 11:35:18 | Critical (3) | Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out; |
| Time Not Established | Critical (3) | Telnet user logged out. |
