Welcome to the Cox Community
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
Messages
Selected Messages
New Contributor
•
TV Volume..
I've got a new TV & am using the HDMI cable from Cox Contour box to TV.. Now I have no control of volume unless I switch to TV button on remote & then adjust.. I use to be able to control volume thru the Cox Box?? I've tried messing with audio settings but hasn't helped..
DustinP
Moderator
•
Which Cox Remote are you using? Have you attempted to use the TV Programming Codes with the Cox Universal Remote? Here is a link to our website with programming codes.
http://www.cox.com/residential/support/tv/article.cox?articleId=565a9f10-69b9-11df-5fca-000000000000
Hope this helps,
0
0
artwizdb
New Contributor
•
My remote works.. I can push the TV button on COX remote & adjust the TV volume.. I also can control the Stereo volume using TV or AUX buttons, but when you're on CABLE button you can only change channels & control the COX Contour functions.. No audio control.. I've changed settings in output settings in COX, But still no volume control.. I can hear volume but no up or down control.. It's like the Cable box has audio output, but no control on the HDMI output?? I use to use the RCA outputs & it worked..
0
0
StephanieA
Former Moderator
•
0
0
artwizdb
New Contributor
•
Yes the cable light blinks, but nothing happens.. Settings> Audio &Video> Audio Settings> Volume level> Variable "If your remote control is set to control your receiver's volume"..
0
0
artwizdb
New Contributor
•
Analog output is on surround sound, Digital output is on Dolby Digital (AC3), Dynamic Range is on Wide, & Audio Language is on Primary.. I've changed multiple different settings, but nothing seems to help..
0
0
stevemac
New Contributor
•
Is there a solution to this situation? I have the exact same problem my cox remote URC 8820 Cisco, will control power and changing channels, but only changes volume if I press tv button first.
0
0
StephanieA
Former Moderator
•
What model and type of TV do you have?
0
0
artwizdb
New Contributor
•
I tried programming a different remote & now I can control my TV.. Thanks Everyone!!
0
0
artwizdb
New Contributor
•
I also have a URC 8820 remote.. I switched remotes with the one I have on another TV & it now works.. Now when I touch volume button, the TV button blinks, even after I'd pushed the cable button.. Try a different remote..
0
0
artwizdb
New Contributor
•
Ok.. I just took the original remote from new TV, and programmed it to the other room's TV.. Now I have both TV and COX Box volume control?? Like I used to have on main system before using HDMI cable.. WEIRD..
0
0
DustinP
Moderator
•
Did you adjust the receiver audio settings and find that pressing cable then volume controls the receiver, and tv then audio adjusts the TV audio?
0
0