New Contributor II
•
3 Messages
Finding IP Address for D Link DAP 1650 setup as Access Point
Connected a DAP 1650 to the cisco modem provided by Cox. Set it up with a new ssid as an access point. Internet is working on computer that I used to set up the DAP 1650, but not on any other wireless device, and I cannot find the IP address to get back into the DAP setup page. Any help would be much appreciated. Thanks!
Accepted Solution
littlewave
New Contributor II
•
3 Messages
10 years ago
Thanks for the replies...turns out my problem was that the box that Cox sent, which the sales rep and tech who installed both told me was a modem/router, was just a modem. New router solved my problems, access point is now working as an extender so we've got wifi throughout the house.
0
0
AllenP
Valued Contributor
•
1.7K Messages
10 years ago
If you have a smartphone or tablet, use a network scanner app like Fing. It will scan your entire LAN and report all active IP addresses it finds. Fing is free and available on iOS & Android.
0
0
MichaelJ
Moderator
•
1.8K Messages
10 years ago
0
0
AllenP
Valued Contributor
•
1.7K Messages
10 years ago
What manufacturers software? The link you provided is to firmware and manuals, not other software. Also the quick start guide doesn't refer to anything other than a web interface. Can you explain?
0
0
MichaelJ
Moderator
•
1.8K Messages
10 years ago
0
0