New Contributor
•
8 Messages
Problems with Contour 2 DVR
I'm on the second Contour 2 DVR box since it came out a couple months ago. I swapped out the first one at the suggestion of tech support, having the issues I describe below, but the second box has the same issues. I've had 2 technicians come to my house to check things out in person. I've scheduled the DVR to record shows as "new episodes" only (no repeats) on HD preferred, however it still cues up old shows which aren't new. Case in point: Chicago PD. I've asked it to record "new only" and it will record the new episodes, however it also has scheduled to record 20 episodes which are reruns on channel 1340/Oxygen (Ft Walton Beach, FL area), starting at 5 am on Tuesday March 21 through 2 am on March 21. If I check the info on on one of these reruns, it does not say "Repeat." It's not classifed as either new or repeat as some shows are.
Another case in point: Tosh.O, and I've scheduled it to record "new only" and It has cued up to record 25 episodes on channel 1056/Comedy starting at 11 am on March 25 through 10:30 pm.
This also happened with Ridiculousness where it cued up to record over 20 episodes of reruns. I cancelled that recording altogether.
If I leave this alone, the DVR will end up recording close to 60 reruns of the shows I want. The technician who came to my house and saw this issue said he thinks it's a "glitch" that Cox will push an update on later to "hopefully fix this problem."
Another issue I'm having with the new DVR box is that sometimes when I turn on "All Power" which will turn on my TV and I suppose wake up the DVR, is that there will not be a TV signal going to my TV. It's just a screen on my TV which says "No Signal." In this case I have to either reset the box (either go online and ask it to send a signal to reset, or unplug the power), or lately I've had to press the blue illuminated power button on the box to turn it off and then back on again for it to send the signal to my TV. The technician said to set the power preferences to always on, as in do not go into power save, but that hasn't fixed the problem. Along those lines, why have a power save option if I can't use it either?
Any thoughts or suggestions? This is all very frustrating. I like the new Contour 2, but I never had these issues with my previous Cox DVR.
Becky
Moderator
•
4.3K Messages
7 years ago
Cox is aware of the Contour 2 issue where series recordings set for "new episodes only" are recording all new and repeat episodes. We recommend setting up recordings for new episodes as stand-alone, individual recordings rather than as a series recording.
There is also an issue where the Power Saver settings seem to reset randomly, causing the receiver to appear turned off. Power cycling the receiver as you have been doing is our best suggestion at this time. Video engineers are working on permanent fixes for both issues.
0
0
SoonerAl
Contributor II
•
115 Messages
7 years ago
Do you know if the series recording issue was fixed? I received an update on our Contour DVR this morning but have been reluctant to schedule more than one episode of a series at a time, e.g. using the recurring schedule option.
0
0
Becky
Moderator
•
4.3K Messages
7 years ago
Updates made to Contour 1, Contour 2, and Rovi video software are handled by our corporate video engineers, who don't provide release notes for minor changes. I suggest that you test a series recording for one TV series airing on a night when you will be home to monitor the recording. Let us know the results of your test!
0
0
SoonerAl
Contributor II
•
115 Messages
7 years ago
I scheduled a series recording of Criminal Minds with new episodes only. I do not see any extraneous episodes scheduled other than the new episodes. So I would say the issue is fixed...
0
0
StephanieS
Moderator
•
638 Messages
7 years ago
That's good news! Feel free to reach out here 24/7.
StephanieS
Cox Support Forums Moderator
0
0
tonguetwister
New Contributor III
•
138 Messages
7 years ago
Unless I'm mistaken, unlike channels such as FX, AMC and HBO (to name a few), where multiple re-broadcasts are aired *after* the initial program's time slot, there should be only one Criminal Minds on CBS; meaning, there aren't any reruns or repeats once Wednesday night's broadcast is concluded, until perhaps prior to a subsequent season's premier, and that would be way beyond Contour's typical 2-week guide window.
0
0
SoonerAl
Contributor II
•
115 Messages
7 years ago
In my case a number of Criminal Minds reruns on other channels were scheduled after I initially scheduled the CBS program for only new episodes. i have NOT seen that issue after the most recent update the other day...
0
0
Corgi
New Contributor
•
7 Messages
7 years ago
The power save "No Signal" problem is a known issue with these boxes which are the same boxes as the Infinity X1 used by Comcast. Turning off the Power Save preferences solves the issue since the box stays on all the time, a signal is being sent to the TV so when the TV power is turned on, the signal is immediate. I thought I had this solved by turning on the the HDMI LInk under Settings=Device Preferences =Labs which would put the box into sleep mode and the box would come out of sleep mode when I turned both the TV and the box on. But this morning, HDMI link was gone from the Labs so back to keeping the box on all the time.
0
0
FWB_customer
New Contributor
•
8 Messages
7 years ago
0
0
Corgi
New Contributor
•
7 Messages
7 years ago
I'm not surprised at all by that....these boxes to me are like Beta testing and we are the guinea pigs?
0
0
mattyro
New Contributor II
•
11 Messages
7 years ago
The handshake between your Contour and your tv is not happening. As you have learned the tv must be on when the box fires up. try using channel up or down and then turn the tv on. the tv will be gewtting a signal and recognize your contour.
0
0
Corgi
New Contributor
•
7 Messages
7 years ago
thanks. Will try your solution next time it happens, which is almost every day. If that doesn't work, I could also try turning on the TV first by itself, then the box.
0
0
Corgi
New Contributor
•
7 Messages
7 years ago
I tried the channel up button, but box did not come on..However, found out if I pressed one of the number buttons, the box would turn on from power save and then turning on the TV with only the TV power button solved the problem. No more issues with the dreaded "no signal"! Thanks for your tip.
1
0
FWB_customer
New Contributor
•
8 Messages
7 years ago
I've noticed that if a show is not tagged or designated "Repeat" on the guide, the DVR schedules it to record the episode, but in my case it schedules an entire day of episodes (has been the case with Chicago PD and now an entire lineup of Whose Line is it Anyway on channel 1368 UPHD in Ft Walton Beach, FL - 26 episodes starting at 7:59 on Monday 30 April straight through to 2:00 am on 1 May). When I press info on these scheduled episodes, it does not say "New" or "Repeat." I have set my DVR to record New episodes only, which it does. Now it appears that if the episode is not tagged as a Repeat, the DVR tries to record it like it does a new episode.
1
0
jjvolk
New Contributor
•
1 Message
7 years ago
I've noticed that several shows on different channels take a re-run and add a few minutes of EXTRA CONTENT to it and it shows up as NEW in the Cable listing although it is a re-run. Perhaps this is part of the issue of the Contour box recording a re-run show as NEW?
1
0