Visitor

 • 

1 Message

Printer/Ring

My Epson ET-4850 printer will see my Wi-Fi network, SETUP-D613, but it will not connect. The printer reports error E-6 and has an IP address of 169.254.122.245, which indicates it isn't receiving an IP address from the router.

 

Please check whether the gateway is allowing the printer's MAC address to connect, whether DHCP is assigning addresses correctly, and whether the 2.4 GHz Wi-Fi connection is working.

 

Please refresh the gateway if needed, but do not change my Wi-Fi name or password. My Ring and other devices are connected.

Moderator

 • 

154 Messages

Hi bdahm2511,

 

We apologize for your trouble. Can you confirm if your wifi network is displaying two networks or just one? The 5Ghz and 2.4 Ghz. If the "SetUP" network name  is only displaying once on your wireless network list. I suggest splitting your networks so that they both display. Then try to connect the 2.4 Ghz network to your printer. You can split your wifi networks by following the steps below:

 

  • Open the app: Launch the Panoramic Wifi App on your mobile device and sign in with your primary Cox user ID and password. 
  • Go to WiFi settings:
    • From the bottom toolbar, tap WiFi.
    • Tap the WiFi detials widget.
    • Tap Edit WiFi settings (or My WiFi depending on your app version). 
  • Toggle Split Bands:
    • Look for the Split Bands toggle switch.
    • Toggle it on to separate your 2.4 GHz and 5 GHz networks into individual SSIDs.
    • Note: Some newer gateway firmware updates or Android app versions no longer display the split band toggle switch within the app interface. 

 

-Allison