Welcome to the Cox Community
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
Messages
Selected Messages
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
I just got a new printer it is an Epson ET-4800. I had another printer when I switched to COX neither printers will connect to the internet.
Discussions
•
Updated
63
3
0
Printer/Ring
Discussions
1
0
Reset Modem Often!
Discussions
2
0
Received email regarding house amplifier
Discussions
1
0
Remote
Discussions
1
0
Disabling CoxWifi
Discussions
4
Switch to star link
Discussions
0
0
Spectrum took over cox and made it so much worse
Discussions
3
0
Received email regarding house amplifier
Discussions
1
0
Printer/Ring
Discussions
1
0
LatitiaS
+2 more
Moderator
•
Hi asayre05, I would recommend double checking your settings or perhaps resetting both the router and your printer.
-Latitia
0
0
enrjyzr
Visitor II
•
@asayre05 your printer will probably need to connect wirelessly at 2.4gHz and not at 5.0gHz. Depending on your modem/gateway you might need to go into the settings and set your printer up that way, OR check the manual that you can find here: https://epson.com/Support/Printers/All-In-Ones/ET-Series/Epson-ET-4800/s/SPT_C11CJxxxx#manuals The little screen on the printer should also be able to help you set up your printer wirelessly. You will need the information from the bottom of the modem/gateway in order to sign in, and it's usually "admin" and "password" but could be different on your modem.
(edited)
2
0
ExtraChrispy
Contributor III
•
One of my managed IT clients has this printer and we have it connected to their Pananorama wifi and it exhibits frustrating behavior. It connects fine and will print but when it goes into sleep mode, you have to go and physically slap it around via the power button to get it to wake up and reconnect.
1
0