Welcome to the Cox Community
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
Messages
Selected Messages
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
New Contributor
•
3 Messages
Closed
Hi,
I'm still getting drops a handful of times a day when using the internet, it's especially noticeable during streaming tv or playing games, and is kinda frustrating.
I've had techs come out 3 times, they replaced the entire line from the pole through the house, there's no splitters (it's a direct connection, with a brand new line), and the last tech even said he installed a media over coax filter to help keep signals down. I've even swapped modems twice (now on an SB8200 that was recommended by the cox store).
But I keep getting these errors:
The table below contains the log of events that the SB8200 has detected. This log can be important to the service provider to help diagnose and correct problems, if any should occur.
| Time | Priority | Description |
|---|---|---|
| 1-1-2018, 17:26:31 | Notice(6) | "TLV-11 - unrecognized OID;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:45 | Warning(5) | "DHCP WARNING - Non-critical field invalid in response ;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:43 | Notice(6) | "Honoring MDD; IP provisioning mode = IPv4" |
| 1-1-1970, 0:0:34 | Critical(3) | "SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
| 12-31-2017, 17:55:47 | Critical(3) | "No Ranging Response received - T3 time-out;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:38 | Critical(3) | "No Ranging Response received - T3 time-out;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:33 | Critical(3) | "SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
| 12-31-2017, 13:19:57 | Critical(3) | "No Ranging Response received - T3 time-out;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:38 | Critical(3) | "No Ranging Response received - T3 time-out;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:42:5a:1d:4c:ed;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:33 | Critical(3) | "SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
| 12-30-2017, 11:54:31 | Critical(3) | "SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:1:47 | Critical(3) | "SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
| 1-1-1970, 0:0:33 | Critical(3) |
"SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol timing;;CM-MAC=90:9d:7d:2e:92:c1;CMTS-MAC=00:00:00:00:00:00;CM-QOS=1.1;CM-VER=3.1;" |
The status listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem.
| Startup Procedure | ||
|---|---|---|
| Procedure | Status | Comment |
| Acquire Downstream Channel | 405000000 Hz | Locked |
| Connectivity State | OK | Operational |
| Boot State | OK | Operational |
| Configuration File | OK | |
| Security | Enabled | BPI+ |
| DOCSIS Network Access Enabled | Allowed | |
| Downstream Bonded Channels | ||||||||
|---|---|---|---|---|---|---|---|---|
| Channel ID | Lock Status | Modulation | Frequency | Power | SNR/MER | Corrected | Uncorrectables | |
| 41 | Locked | QAM256 | 405000000 Hz | 3.1 dBmV | 40.6 dB | 0 | 0 | |
| 5 | Locked | QAM256 | 807000000 Hz | 1.7 dBmV | 39.2 dB | 0 | 0 | |
| 6 | Locked | QAM256 | 813000000 Hz | 1.6 dBmV | 39.1 dB | 0 | 0 | |
| 7 | Locked | QAM256 | 819000000 Hz | 1.5 dBmV | 39.1 dB | 0 | 0 | |
| 8 | Locked | QAM256 | 825000000 Hz | 1.4 dBmV | 39.1 dB | 0 | 0 | |
| 13 | Locked | QAM256 | 855000000 Hz | 0.7 dBmV | 38.5 dB | 0 | 0 | |
| 14 | Locked | QAM256 | 861000000 Hz | 0.7 dBmV | 38.6 dB | 0 | 0 | |
| 15 | Locked | QAM256 | 867000000 Hz | 0.5 dBmV | 38.6 dB | 0 | 0 | |
| 16 | Locked | QAM256 | 873000000 Hz | 0.5 dBmV | 38.5 dB | 0 | 0 | |
| 17 | Locked | QAM256 | 879000000 Hz | 0.3 dBmV | 38.6 dB | 0 | 0 | |
| 18 | Locked | QAM256 | 885000000 Hz | 0.3 dBmV | 38.8 dB | 0 | 0 | |
| 19 | Locked | QAM256 | 891000000 Hz | -0.1 dBmV | 38.5 dB | 0 | 0 | |
| 20 | Locked | QAM256 | 897000000 Hz | -0.1 dBmV | 38.4 dB | 0 | 0 | |
| 21 | Locked | QAM256 | 903000000 Hz | -0.4 dBmV | 38.3 dB | 0 | 0 | |
| 23 | Locked | QAM256 | 915000000 Hz | -0.2 dBmV | 38.2 dB | 0 | 0 | |
| 24 | Locked | QAM256 | 921000000 Hz | -0.2 dBmV | 38.0 dB | 0 | 0 | |
| 25 | Locked | QAM256 | 927000000 Hz | -0.1 dBmV | 38.1 dB | 0 | 0 | |
| 26 | Locked | QAM256 | 933000000 Hz | 0.0 dBmV | 38.3 dB | 0 | 0 | |
| 27 | Locked | QAM256 | 939000000 Hz | 0.1 dBmV | 38.3 dB | 0 | 0 | |
| 28 | Locked | QAM256 | 945000000 Hz | 0.0 dBmV | 38.3 dB | 0 | 0 | |
| 29 | Locked | QAM256 | 951000000 Hz | -0.1 dBmV | 38.3 dB | 0 | 0 | |
| 33 | Locked | QAM256 | 357000000 Hz | 2.2 dBmV | 40.4 dB | 0 | 0 | |
| 34 | Locked | QAM256 | 363000000 Hz | 2.2 dBmV | 40.5 dB | 0 | 0 | |
| 35 | Locked | QAM256 | 369000000 Hz | 2.3 dBmV | 40.4 dB | 0 | 0 | |
| 36 | Locked | QAM256 | 375000000 Hz | 2.3 dBmV | 40.4 dB | 0 | 0 | |
| 37 | Locked | QAM256 | 381000000 Hz | 2.6 dBmV | 40.6 dB | 0 | 0 | |
| 38 | Locked | QAM256 | 387000000 Hz | 2.7 dBmV | 40.3 dB | 0 | 0 | |
| 42 | Locked | QAM256 | 411000000 Hz | 3.1 dBmV | 40.5 dB | 0 | 0 | |
| 43 | Locked | QAM256 | 417000000 Hz | 3.2 dBmV | 40.7 dB | 0 | 0 | |
| 44 | Locked | QAM256 | 423000000 Hz | 3.2 dBmV | 40.7 dB | 0 | 0 | |
| 45 | Locked | QAM256 | 429000000 Hz | 3.2 dBmV | 40.5 dB | 0 | 0 | |
| 46 | Locked | QAM256 | 435000000 Hz | 3.2 dBmV | 40.5 dB | 0 | 0 | |
| 159 | Locked | Other | 300000000 Hz | 6.3 dBmV | 41.8 dB | 3372 | 0 | |
| Upstream Bonded Channels | ||||||
|---|---|---|---|---|---|---|
| Channel | Channel ID | Lock Status | US Channel Type | Frequency | Width | Power |
| 1 | 3 | Locked | SC-QAM | 29800000 Hz | 6400000 Hz | 37.5 dBmV |
| 2 | 1 | Locked | SC-QAM | 18400000 Hz | 3200000 Hz | 35.0 dBmV |
| 3 | 2 | Locked | SC-QAM | 23300000 Hz | 6400000 Hz | 36.5 dBmV |
| 4 | 4 | Locked | SC-QAM | 36300000 Hz | 6400000 Hz | 39.0 dBmV |
Current System Time: Mon Jan 1 17:38:47 2018
And this is my spectrum analysis (normal, and when the drop happens):
This really seems to be a cox upstream issue. Can I get a data tech or something to look into why my signal levels plummet several times a day? This happens enough that my home automation stuff doesn't work reliably and I am usually kicked out of a movie at least once - it doesn't seem to record these events when I'm not using the internet.
Discussions
•
Updated
2.2K
4
0
0
Cox bill wrong
Discussions
1
Poor internet service
Discussions
0
0
Cox / spectrum sucks
Discussions
1
0
Spectrum is terrible
Discussions
6
Reapeating connectivity issues
Discussions
1
0
Tv upgrade to HD
Discussions
1
0
Cox bill wrong
Discussions
1
Poor internet service
Discussions
0
0
Cox / spectrum sucks
Discussions
1
0
Connection Issues After Isaias
Discussions
1
0
JonathanJ
Former Moderator
•
Please email your full address and the primary name of the account holder to cox.help@cox.com so we can take a closer look at your signal levels.
0
0
pandas
New Contributor
•
Okay, done. Thanks for helping!
If it helps, I get this warning on my cox account page when it happens too:
So it's definitely noticed on both sides
0
0
JonathanJ
Former Moderator
•
Give us a few we will be responding to your email.
0
0
pandas
New Contributor
•
Thanks, just going to add more status pages, as the signal jumps wildly:
The status listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem.
Current System Time: Tue Jan 2 10:42:35 2018
The status listed show the connection state of the cable modem. They are used by your service provider to evaluate the operation of the cable modem.
Current System Time: Tue Jan 2 10:42:56 2018
Some channels are seeing a 9+ power movement in a few seconds, repeatedly.
This correlates with the dynamic range issues that kick me off the internet:
The table below contains the log of events that the SB8200 has detected. This log can be important to the service provider to help diagnose and correct problems, if any should occur.
0
0