New Contributor
•
2 Messages
Cisco 9865hdc networking
Is it possible to "enable" the NIC port on the 9865hdc?
Related Content
Accepted Solution
Closed
2
0
Closed
1
0
Closed
1
0
Closed
1
0
Closed
9
0
New Contributor
•
2 Messages
Is it possible to "enable" the NIC port on the 9865hdc?
Accepted Solution
Closed
2
0
Closed
1
0
Closed
1
0
Closed
1
0
Closed
9
0
KipK
Former Moderator
•
606 Messages
The Ethernet port on the Contour receivers are only officially enabled for one purpose that I know of, as a media server for devices that support DLNA/DTCP-IP. This was only tested with the Playstation 3, and only on the previous version of the Contour software, so I'm not 100% sure it still applies, but the instructions can be found in this previous forum post.
0
0
ctx89
New Contributor
•
2 Messages
Kip,
Thanks! I can actually see the device in Win 7 libraries but NOT able to access them in Windows media player or any other application. Any ideas?
0
0
KipK
Former Moderator
•
606 Messages
Not that I know of. The "key," so to speak, is that the connecting device needs to support the exact security that the Trio/Contour software and the Cisco hardware is using, and I don't know how to enable that in any platform other than the one we tested on.
0
0