Welcome to the Cox Community
Our community is a collaborative place to learn about Cox products and services. Jump into the conversation today!
Messages
Selected Messages
New Contributor II
•
Contour box freezes
After over 30 years with Cox this year has been a nightmare. I recently was offered Cox complete care but I declined. Now EVERYDAY my contour box freezes. I can continue watching whatever I was watching but can not change channels or control the DVR. I have to reboot my contour box. There is nothing wrong with my connections!! I only have ONE TV. I know it is not my signal because the show I am watching is crystal clear. I can get a tech to come to my house but now Cox wants $75 to service their products.
Bruce
+4 more
Honored Contributor III
•
I'd log into your Cox account to reset your cable-box. Rebooting reboots a cable-box as is. Resetting reloads software and stuff.
If this doesn't help, it is suspicious this started after declining Complete Care.
You could contact the Consumer Protection agency for your state.
www.usa.gov/state-consumer
0
0
CurtB
+4 more
Honored Contributor
•
Being able to view channels doesn't mean you don't have an intermittent signal issue. What you described is a symptom of a signal issue somewhere between your receiver and the Cox server. When you press a button on the remote, a command request is sent to the Cox server which sends a response back to your receiver. A signal issue can cause the receiver to lock up waiting for a response from the server that it never receives. While watching the crystal clear channel, does your receiver ever freeze when you press pause, reverse or fast forward?
You should schedule a tech visit to check your signal. If your cable comes in from a pole, be sure to request a tech with a long ladder. The tech should check your signal at the tap to determine if there's an issue with the main line. If that's the cause, you won't be charged for the tech visit.
4
0