New Contributor
•
3 Messages
Cable doesn't work in the morning; system reboot
Four times in the past week, we have had to reboot our host DVR box several times to access cable. It shows as "No signal" on the tv initially then the box reboots over and over again until i unplug the power cord. Eventually, it reboots successfully but this is easily 30 minutes of our time almost every morning. Anybody else experience this and, if so, is there a solution?
PJS2
Contributor II
•
77 Messages
4 years ago
This happened to me in the last month, same exact symptoms. After some discussions with a Cox tech it was decided a new box was the answer. No problems since the switch.
4
mammacat13
New Contributor
•
1 Message
4 years ago
This happened to me when I was watching tv late night last night. In fact it happens often. We reboot the main box at least once every other day. The picture freezes, the guide will not move up or down, and things that I have recorded pixelates or freezes also. Last night I spent 45 minutes rebooting, then decided to watch the contour app on my phone, but there was no internet. I tried rebooting the box for it but nothing worked, and I am getting ready to find some other way to watch tv and get internet.
1
0
val1
New Contributor
•
1 Message
4 years ago
Same problem. After a system update the box just constantlty reboots.
Pulling out the plug temporarily fixes it until the next system update. Also, "System Refresh" works also until the next system update.
1
0
Corina_B
New Contributor
•
1 Message
4 years ago
This happens with our wireless box every morning. So I reboot the box about 5-6 times. Reboot the modem & the wireless box. It doesn't help, I called technical support the suggested a new box I did this. It worked for about a week and now we're back to the same thing. I called again tech support the again scheduled another appointment. Cox never came! Now I just turn off the TV & cable box for about 1 hour . Then I turn it back on & it works. Let's see how long this works. So frustrated with Cox when the tech doesn't show up! No call or anything from them just all the reminders that they're coming & I have an appointment. What I want to know is why are we paying so much for cable of we have to keep calling for service?
1
pstark
New Contributor
•
1 Message
4 years ago
My box has been taking multiple tries to rebooting after ever system update. It so frustrating to have to do this everyday. If there were a way to keep it from uopdating, it wouldn’t do it. I was up when the update was about to happen, I chose the tab that said to skip this update and it didn’t go to boot on my box. It literally has taken an hour to get the reboot to happen by unplugging the box turning off the tv and then plugging the box back in and use the contour remote to turn them both back on. I may have to do this 10 times before it works. The smart menu reset NEVER works.
0
0