Copy DVR movies to VHS tapes

It would be easier if you told us what DVR and EPG you are using.

Hi Granny,

This isn't something we support, but there is a lot of online information (and YouTube videos) that might be able to help you out. Also, your connections may differ based on the input and output options available on your TV and the specific model DVR you have. A Google Image search for "Connect VHS to DVR" will provide connection diagrams for you.

The basic connection diagram will look something like the following:

• DVR CABLE OUT to VCR CABLE IN
• VHS CABLE OUT (sometimes labeled TO TV) to TV

Becky said:

Hi Granny,

This isn't something we support, but there is a lot of online information (and YouTube videos) that might be able to help you out. Also, your connections may differ based on the input and output options available on your TV and the specific model DVR you have. A Google Image search for "Connect VHS to DVR" will provide connection diagrams for you.

The basic connection diagram will look something like the following:

• DVR CABLE OUT to VCR CABLE IN
• VHS CABLE OUT (sometimes labeled TO TV) to TV

 

Most DVRs also have analog composite RCA jack outs (Yellow, Red, White) which can be used to record a stored movie to a VCR.

Perhaps this link will help? Its kind of simple but if gives you a idea.You want Solution # 2 I believe.

Also, recording onto a VCR means nothing will be in HD. I think the max resolution is 240i, while even a normal cable box puts put atleast 480i. All that means is it probably won't look as clear. If this bothers you, I can show you other alternatives, but some of them will cost a little extra money, and others might be a bit more complicated to hook up. 

Health Edge said:

Perhaps this link will help? Its kind of simple but if gives you a idea.You want Solution # 2 I believe.

Also, recording onto a VCR means nothing will be in HD. I think the max resolution is 240i, while even a normal cable box puts put atleast 480i. All that means is it probably won't look as clear. If this bothers you, I can show you other alternatives, but some of them will cost a little extra money, and others might be a bit more complicated to hook up. 

I prefer using the RCA connections, as explained on Page 6/7 and Page 16 of:

http://www.cisco.com/en/US/docs/video/at_home/Set-Tops/8000_STTs/4026881B.pdf

Perhaps but I wanted to keep the instructions as simple as possible. Since not every VCR has RCA in, it might complicate the situation. Also, since the medium is lower resolution then max resolution of RCA, what does it matter? 

Health Edge said:

Perhaps but I wanted to keep the instructions as simple as possible. Since not every VCR has RCA in, it might complicate the situation. Also, since the medium is lower resolution then max resolution of RCA, what does it matter? 

 

I've never seen a VCR without composite inputs.

 

Alot of older VCRs had RCA output but only coaxial input. But either way OP asked for simplist steps. 

Health Edge said:

Alot of older VCRs had RCA output but only coaxial input. But either way OP asked for simplist steps. 

Nothing could be simpler than just adding one set of cables to an existing installation. No disconnecting any existing cable.

Health Edge said:

. Also, since the medium is lower resolution then max resolution of RCA, what does it matter? 

Resolution isn't at question. It's the matter of adding an additional modulating and de-modulating step, along with the addition of the video noise and distortion.

I think what really matters is what the OP prefers. Don't be so concerned about who is right. Cheer up Mr Schrooch 

Health Edge said:

I think what really matters is what the OP prefers. Don't be so concerned about who is right. Cheer up Mr Schrooch 

 

When you insist that rewiring the entire coaxial route is easier than simply adding an A/V cable, I gotta call you on it.

 

Who is this "Mr.Schrooch" anyway? Do you perhaps mean "Mr. Scrooge" ?? 

 

If you wish to discuss this further I can be contacted at Trikein@gmail.com. I wont waste the time of this forum anymore with such argument.  If you have something to say to me, you know how to contact me. ;-)