ContributionsMost RecentMost LikesSolutionsChannel lock limit UPLOAD Are up load channels locked (limit) at 4 only....have 24x8 modem all 24 download lock but only 4 upload lock.. Re: Power saver UPDATE Found method to set time on power saver function The default is 4 hrs. If you allow the power saver to activate, usually no activity overnight the light on the box will turn off ,& go into sleep mode. When you power up the TV using contour remote next morning this awakens the box & light will turn on. In the upper right hand corner of TV a msg will appear indicating amount of time box in sleep mode Press info on remote & get menu to change time interval; 1,2,4,6 or 8 hours or off UPDATE 2: Appears on 12/5/18 this option was removed with firmware (?) update...no longer available Re: Power saver Thks Power saver How do you adjust the time b4 sleep mode applied I understand it is about 4 hrs by default. I cannot find the adjustment in settings only turning it on or off PS I have a contour 2 (pace) box Upload Channels Have Moto 7420 16x4 modem which has been working perfectly until last 24 hrs...Only connects (bonds) on 1 channel upstream @ 57dBmv whereas all 4 channels connected in optimal range of 39 ~42 dBmv prior to past 24 hrs....Have done all routine troubleshooting: ie, check connections, reset/reboot, ground etc...Continues to connect @ 57 dBmv one channel only. Downstream is fine...Anyone have an idea what could be causing this?