ContributionsMost RecentMost LikesSolutionsRe: New user of contour 2- power all button on remote doesn't work. SOLVED!!! Sequence that worked - 9-8-1 to reset remote allowed system to pair to TV - worked as expected When asked to pair to Panasonic - I let it start (NOT SKIP - that never worked) but did not enter Panasonic when asked what device it was. While screen asking what sound device I wanted to pair was being displayed, I pressed SETUP button, then entered code from website for my model Panasonic and Pressed OK Pressed EXIT from setup screen TV power button turns TV on/off ALL power button turns both devices on/off! - channel change works. Volume change works! I assume my contour box does NOT turn off so I set contour box display to off. Life is good! Key was never letting system enter its own code - that never worked AND not telling it to skip pairing to sound device - that also never worked!! Re: New user of contour 2- power all button on remote doesn't work. Will do that today... sigh Re: New user of contour 2- power all button on remote doesn't work. Did that under direction of tech support the first day I got the system. No difference. Once I put in the Panasonc code, it overwrites (?) the TV code. ALSO ALL POWER ON BUTTON does NOT work at all - the contour box never shuts off unless I push the on/off button on the top of the contour box. Re: New user of contour 2- power all button on remote doesn't work. I used that web page to get the entry code for both the TV and the Panasonic Stereo. I have tried pairing to the panasonic using the auto pairing Ino code) method AND I have tried pairing using the code I got from the web site. Same result. Re: New user of contour 2- power all button on remote doesn't work. Before pairing with panasonic, TV POWER on tuirned on the TV. After pairing to Panasonic, TV POWER ON turns on the Panasonic. I have to use a seperate remote to turn on and off the TV. I have tried pairing to the panasonic using the auto pairing Ino code) method AND I have tried pairing using the code COX's web site gave me. Same result. Re: New user of contour 2- power all button on remote doesn't work. XR11-RF is printed on the back of the remote New user of contour 2- power all button on remote doesn't work. When paired with both my TV and stereo, the power all button doesn't do anything. When paired with TV only it DOES work. When paired with TV and stereo, TV power button only controls the stereo. Stereo is connected only to TV via the optical cable, not to the contour box. Tried multiple codes for TV and stereo. None work for power but do control sound level. Contour box does control channel change. TV is Sharp Aquos. Stereo is Panasonic DVD/Surround sound Stereo. Both are at least 15 years old. Solved