ContributionsMost RecentMost LikesSolutionsCox IP blocked as suspicious Thousands of IP addresses are being blocked by McAfee firewall. IP addresses for Akami Technology and Cox are the bulk of them. Some have reported degraded internet service as a result of these suspicious IPs attempting to connect to my network through Cox. What is happening here and can Cox do anything to prevent this? Thanks. Richard Ehlke Re: No signal on 2 channels Thanks for checking back. Not sure what is meant by "reboot" for a minibox. The main digital box is working fine so I dont want to refresh that. Plus 2 of my 3 minis are working. I swapped one of the other minis but the the problem persisted. I suspect possible interference on the coax but why should it only appear on 2 channels? No signal on 2 channels Getting no signal message on just 2 channels on one of my miniboxes. No problem on 2 other boxes and main cable box. Reconnected and tightened cable connections to no avail. Any ideas as to what might be the problem? Discovery ID video and audio breaking up. Discovery ID channel video and audil breaking up last few days. Anybody know what the problem is? Thanks. Contour cable box green light bar. The green light bar on the Contour cable box has begun to blink intermittently. Does not seem to affect reception but what does it mean? Re: Mini box remote no longer powers on/off I hold setup and LED flashes RED once then after a while RED twice. No response when 981 is entered. Pressing Menu button does not offer an on-screen Remote Control option. The remote I am using is a mini-box remote URC-2220-R. Mini box remote no longer powers on/off URC 2220-R remote can no longer power on and off the TV. All other functions work and it has previously worked since I got the mini box. I have 2 other mini boxes and this remote cannot power up them either. These other 2 remotes also cannot power up the first TV. Therefore, not clear whether the problem is with the remote or the mini box. Thanks for any assistance.