ContributionsMost RecentMost LikesSolutionsAre these signal levels bad? Hi, Can someone tell me if these downstream signal levels are bad, and why the event log has so many warnings and critical events? I posted a screenshot athttps://imgur.com/yyaGvfz. I have anew modem, but the signals looked the same on the old modem. I also noticed the blue downstream arrow has not stopped blinking since I connected it, except for maybe once. I contacted Cox support, but they could not see anything wrong. The modem event log shows multiple warnings and critical events, such as: SW upgrade Failed after download -Incompatible SW file SW upgrade Failed after download -SW File corruption MDD message timeout DHCP FAILED - Request sent, No Response REG RSP not received Dynamic Range Window violation No Ranging Response received - T3 time-out SYNC Timing Synchronization failure - Failed to acquire QAM/QPSK symbol DHCP WARNING - Non-critical field invalid in response REG-RSP-MP Mismatch Between Calculated Value for p1.ghi Compared to CCAP Provided Value TLV-11 - unrecognized OID Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out RNG-RSP CCAP Commanded Power in Excess of 6 dB Below the Value Corresponding to the Top of the DRW Thank you for any help.