Forum Discussion

DLabit29's avatar
DLabit29
Contributor
4 years ago

Ping Plotter

Packet loss when gaming. EXCESSIVE 

I've gotten mad and hardwired straight to the modem thinking it would be better....definitely not

I've had handfuls of separate technician visits this years alone to find the issue. 

All in home Coax was all changed. 

Wires from home to road were changed. 

Intermittent noise issue was "Resolved"

1 splitter. All ran properly and check by cox tech.

Modem levels all in range. 

Tried 3 different modems as troubleshooting. 

Ping spikes like crazy.

Upload speeds fluctuate majorly

What should be doinjg on a ping plotter to find the issue?

Any and all advice taken here.

4 Replies

Sort By
    • BenS1's avatar
      BenS1
      Former Moderator
      4 years ago
      @DLabit29 Hi, Can you bypass the splitter and plug it directly into the wall from the modem? -Ben
      • DLabit29's avatar
        DLabit29
        Contributor
        4 years ago

        It is straight to the wall 

        The splitter is right at the beginning of my home.

        Without the splitter, my downstream levels would be too high and my upstream levels would be in the 30s

  • BigLagBates's avatar
    BigLagBates
    New Contributor
    4 years ago

    its awesome to see people with my same issues.

    JUST AWESOME!!!!!

    They told me 3 months to look at my ticket.  customer for 23 years with old infrastructure.  1 Mbps upload and 1k plus latency and jittter. yeeeeeehawwwwwwwwww.