Forum Discussion

DJV's avatar
DJV
New Contributor II
7 years ago

Cox to eliminate traditional copper phone and replace with VOIP.. BAD NEWS

As a longstanding COX customer, I don't want VOIP phone service as it has limitations when real emergencies happen (e.g., power outage, earthquake, etc.) Traditional copper phone lines work without electricity, with VOIP no power, no phone. This is really disappointing to me. I have copper for a reason and I don't need special modems to use the telephone, which has been around for over 100 years.

Hope COX doesn't force this on me. My phone isn't broke, so there is no need to change it.

  • EvaFam's avatar
    EvaFam
    New Contributor

    I just spoke with the Cox telephone team again (on the phone number they tell you to call for the conversion).

    I learned a little bit more:

    • They do know your cutoff date for conversion. People in the forum have been unable to get date information from Cox, myself included. I ended up speaking with a supervisor, and she was able to tell me my conversion window, and it's comforting. My conversion wave started in January 2018 and it ends in December 2019 (yes, 2019, not 2018), so at least I know my phone isn't going to get cut off next month and I have some time to figure out wiring issues, etc. The supervisor told me that some Cox people don't know where to look for the information, but it is on your account. So, if you can't get it, ask for a supervisor. That's the most helpful information Cox has been able to give me. Hooray! I thanked the supervisor. 
    • I also found out that the conversion deadlines have been extended a few times. My guess is they aren't getting people converted as quickly as they had planned.
    • Apparently they do offer a battery for the Arris TM3402. It's also $29.95. The supervisor told me they are required by law to provide a battery backup option for all landline modems.
    • She said many landline customers preferred having a separate telephone and internet modem and it's no problem to set it up that way if I want to do that.
    • The supervisor also said the modems would handle alarm and fax signals (something most Cox people have avoided answering). I'm starting to believe it might work (as long as it's wired properly). I've been doing some searches on the topic. I don't remember all the technical things I've read about how the calls are handled, but the cable company VOIP systems can have higher quality than what you'd get with a service like Vonage or Ooma. The age of your alarm system might also have an impact. 
    • The supervisor said she's only seen one case where a tech wasn't able to convert a residence to the new system. (I'll likely be the second unless I rewire things before the tech arrives). I couldn't get any comment about whether their techs would run wires inside of walls, etc. I'm pretty sure they won't. Maybe I could have the tech come out and see if he's baffled or not.

    Anyway...I hope that's helpful information to some people. I'm glad to know I have a little bit of breathing room on the conversion. That will give me some time to figure out what to do with my wiring.

  • Old_Jedi's avatar
    Old_Jedi
    New Contributor III

    There was another surprising claim in this thread.  When Cox did my conversion to the modem, they disconnected all of my old phone jacks.  The only way I can use a phone is to plug it into the modem.  I lost my fax machine which was not where the modem was, and I had to move my base station for the cordless phones to where the modem was installed.

  • @Old jedi,

    We can certainly look into this issue for you. Please send us an email with your account information and a link to this thread to cox.help@cox.com so we can help. 

    Thanks,

    Allan - Cox Support Forums Moderator.

  • bryaninphx's avatar
    bryaninphx
    Valued Contributor

    Old Jedi said:

    There was another surprising claim in this thread.  When Cox did my conversion to the modem, they disconnected all of my old phone jacks.  The only way I can use a phone is to plug it into the modem.  I lost my fax machine which was not where the modem was, and I had to move my base station for the cordless phones to where the modem was installed.

    Your Install was NOT done correctly, call Cox and have them come out and redo the install.  All my jacks are active, I have a FAX, Answering Machine and a Monitored Alarm panel with line-seizure, and everything works exactly the same as when I had the outdoor NIU.

  • Mikee's avatar
    Mikee
    New Contributor

    I am not too keen on the idea of having the Cisco DPC3010 dumped on us - this modem has been obsoleted by Cisco. https://www.cisco.com/c/en/us/obsolete/video/cable-modem-model-dpc3010-epc3010.html

    I understand this modem was specified because it has the voice gateway and battery system and is free BUT it is still obsolete!!!

    If I were to use the Arris SVG2482AC, isn't this the same as the Arris TG2472.  I believe the TG2472 is used by the Cox Contour Panoramic system but I think Arris SVG2482AC is commercial version? The SVG2482AC has a battery backup voice gateway as well

  • Mikee,

    Cox Certified Cable Modems can be found on our cox.com website here: https://www.cox.com/residential/support/cox-certified-cable-modems.html

    If someone's looking to have functioning telephone service with Cox, then an eMTA provided by Cox would be required.