| Frequency start Value |
| This field below allows you to modify the frequency the cable modem start with its scan during initialization and registration. Enter the new start frequency and restart the cable modem for it to take effect. |
|
|
|
|
| Startup Procedure |
| Procedure |
Status |
Comment |
| Acquire Downstream Channel |
357000000 Hz |
| Connectivity State |
OK |
| Boot State |
OK |
| Security |
Enabled |
| IP Provisioning Mode |
Honor MDD |
|
|
|
| Downstream Bonded Channels |
| Channel |
Lock Status |
Modulation |
Channel ID |
Frequency |
Power |
SNR |
Correctables |
Uncorrectables |
| 1 |
Locked |
QAM256 |
33 |
357000000 Hz |
3.1 dBmV |
40 dB |
0 |
0 |
| 2 |
Locked |
QAM256 |
34 |
363000000 Hz |
3.2 dBmV |
40 dB |
0 |
0 |
| 3 |
Locked |
QAM256 |
35 |
369000000 Hz |
3.1 dBmV |
40 dB |
0 |
0 |
| 4 |
Locked |
QAM256 |
36 |
375000000 Hz |
3.2 dBmV |
40 dB |
0 |
0 |
| 5 |
Locked |
QAM256 |
37 |
381000000 Hz |
3.7 dBmV |
40 dB |
0 |
0 |
| 6 |
Locked |
QAM256 |
38 |
387000000 Hz |
4.4 dBmV |
40.1 dB |
0 |
0 |
| 7 |
Locked |
QAM256 |
39 |
393000000 Hz |
4.2 dBmV |
40 dB |
0 |
0 |
| 8 |
Locked |
QAM256 |
40 |
399000000 Hz |
3.9 dBmV |
40 dB |
0 |
0 |
| 9 |
Locked |
QAM256 |
41 |
405000000 Hz |
3.7 dBmV |
40 dB |
0 |
0 |
| 10 |
Locked |
QAM256 |
42 |
411000000 Hz |
3.4 dBmV |
39.9 dB |
0 |
0 |
| 11 |
Locked |
QAM256 |
43 |
417000000 Hz |
3.3 dBmV |
39.9 dB |
0 |
0 |
| 12 |
Locked |
QAM256 |
44 |
423000000 Hz |
3.2 dBmV |
39.7 dB |
0 |
0 |
| 13 |
Locked |
QAM256 |
45 |
429000000 Hz |
3.2 dBmV |
39.7 dB |
0 |
0 |
| 14 |
Locked |
QAM256 |
46 |
435000000 Hz |
3.3 dBmV |
39.7 dB |
0 |
0 |
| 15 |
Locked |
QAM256 |
47 |
441000000 Hz |
3.3 dBmV |
39.6 dB |
0 |
0 |
| 16 |
Locked |
QAM256 |
48 |
447000000 Hz |
3.3 dBmV |
39.7 dB |
0 |
0 |
|
|
|
| Upstream Bonded Channels |
| Channel |
Lock Status |
US Channel Type |
Channel ID |
Symbol Rate |
Frequency |
Power |
| 1 |
Locked |
ATDMA |
1 |
5120 Ksym/sec |
36300000 Hz |
39.1 dBmV |
| 2 |
Locked |
ATDMA |
2 |
5120 Ksym/sec |
29800000 Hz |
39.1 dBmV |
| 3 |
Locked |
ATDMA |
3 |
5120 Ksym/sec |
23300000 Hz |
39.2 dBmV |
| 4 |
Locked |
ATDMA |
4 |
2560 Ksym/sec |
18400000 Hz |
37.6 dBmV |
|
|
|
| Current System Time:Fri Aug 04 05:50:35 2017 |
Does the downstream frequency impact service at all? Reason I am asking is because I notice lately the downstream channels are all in the 300mhz to 400mhz ranges instead of the usual 900mhz range. No issues with service just wondered why the change and what it meant? No splitters amplifiers or attenuators just a straight single one outlet line from underground street sidewalk to side of home as direct as you can get. They never say anything about frequency just power snr QAM. Also signal levels look ok?
I noticed upon reboot of unit it connects in the 900mhz range on the downstream with the power levels closer to 0 but the snr at 35 the Upstream drops within a few minutes on the first channel to 0 and a partial service message is given on the Upstream and it makes a power adjustment to that 300mhz frequency on the downstream from 900mhz. Hopefully it's not an issue. Please let me know thanks. I have seen em in my area a lot lately the techs. Service is fine though.
