HDHomerun Prime to PS3 - Data type is not supported
Hey all, Anyone else use a SiliconDust HDHomerun Prime to stream DRM'd content to multiple TVs with a Playstation 3 with DTCP-IP enabled? This has been working great for a few months, but recently an annoyance has cropped up that I am wondering if anyone else is seeing. While watching FX HD or ESPN HD, during commercial breaks - usually the 5th or 6th commercial will cause the PS3 to display the error message: "the data type is not supported". The only option I have is to click the O-Back button, where the channel image and text are replaced with "Unsupported Data". I can then click the X-Select button to re-tune the channel once the commercial break is over.. .It will then stream fine until the 5th or 6th commercial in the next commercial break. When tuning the lesser quality SD version of FX or ESPN channels at the lower number, I will get the following error message at the same point - "this content cannot be played (800288d8)". Again, this error will continue to be displayed when I hit the X-Select to re-tune the channel until the commercial break is over and regular programming has returned. This happens on three different PS3 units, all running 4.80 firmware. The HDHomerun Prime and PS3s are all configured on a 1Gbps switched network. I am receiving no Ethernet errors, disconnects or dropped packets. The HDHomerun shows the Tuner at 100% and excellent signal quality. I have had SiliconDust engineering look a the Debug Logs and they claim that they are not detecting any faults with the DLNA and DTCP-IP encapsulation of the stream. They believe that Cox must be changing the format of local commercial slots, causing the PS3 to freak out. Also note that I was able to play the exact same content in Windows Media Center without error. Is anyone else using a PS3 to view protected content delivered from a HDHR? Is anyone using HDHR's Android VIEW app to view DRM'd content; Any errors? Thanks!3.8KViews0likes7Comments
HDHomeRun Authorization
I am having a series of HDHomeRun issues...I get the following error. CableCARD: message: Error requesting channel. Please try again later. Several time in a row, and I cannot tune any channels. A Scan finds all of the regular unencrypted ClearQAM types, but not anything we subscribe to...just locals (and QVC). However, not able to receive from DVBLink, TVheadend, etc. (not planning on using WMC), recording is not my concern, just viewing the streams. CableCARD Status Card Manufacturer Motorola Card Authentication success Card Validation success 3DES encryption supported OOB Frequency 104.200 MHz OOB Lock 2.048 Mbps Signal Strength 89% (-6.8 dBmV) Signal Quality 100% (38.7 dB) Channel List tuning-resolver CableCARD(tm) Status Man:MotorolaUptime:0000 00:53 HW:0554050003 Boot: 04.01 FW*06.25- --/--/-- --:--:-- FW--.--- --/--/-- --:--:-- Unit Address:0x0004FF3AF8 000-00838-35640-080 DL State: IDLE Left:0Rcvd:0Rate:0 Last Error:NONE Conditional Access UnitAddress:000-00838-35640-080 Encryption:DES EMM CSN:0xA5/A6 unknown Con:YesEBCP:YesVal:V0x03 CableCARD ID:000-083-835-640-0 Host ID:064-320-875-423-1 Data:199-470-346-09 UnitAddress:000-00838-35640-080 Card S/N:MA1250EGS316 eCM MAC:Unknown Host MAC:00:18:DD:32:02:B9 Host Type:One-way2.7KViews0likes3Comments
Seeking Help With HDHomerun Prime, Moto Cable Card, Moto TR
Using a new HDHomerun Prime with latest FW/SW with Windows 7 Media Center. Already ran Digital Cable Advisor to enable the PC to receive digital cable. After installing SW abd setting up the HW called COX customer support to get the cable card setup. Gave them the pertinent info and after some time they said it was done. However I found I was only getting a small subset of the channels I subscribe to. Mainly the locals both SD and HD. I suspect that it is the channels that are clear/unenctypted. Using the HDHOMERUN utility to scan for channels had the same result as trying to tune the channels through WMC. Looking at the log file, when I change to a channel I get a message logged like: Tuner1: vchannel 2009 (789MHz-3) access = subscribed But for the channels I am not receiving WMC gives a message that I need to subscribe to the channel to view it and the HDHOMERUN log file shows access = not-subscribed I have tried calling customer service but they seem to lack the experience with cable cards to trouble shoot the problem further than "Unplug your TiVo..." I tried them again this morning and the first person put me on hold and I was disconnected. The second person had me unplug the HDHOMERUN, again. And then reloaded the cablecard firmware. The result of this is now I don't even get the channels I was getting. Trying to tune to one of the channels I did get gives a message in WMC with the card ID and data info and says to contact the cable provider. The HDHOMERUN log file shows a message that the channel is subscribed to and then another message following it that the status is not-subscribed. Here is the logfile from booting the HDHOMERUN and when the Cablecard FW was reloaded and then trying to tune channels. The one thing that stands out is that the card validation status shows none and the logfile shows validation needed. 19700101-00:00:00 System: reset reason = power on 19700101-00:00:00 CableCARD: USB device 07B2:6002 connected 19700101-00:00:00 CableCARD: Tuning Resolver connected 19700101-00:00:01 CableCARD: M-CARD inserted 19700101-00:00:02 CableCARD: Tuning Resolver downstream status: success 19700101-00:00:02 CableCARD: Tuning Resolver upstream status: success 19700101-00:00:02 CableCARD: Tuning Resolver authentication status: success 19700101-00:00:02 CableCARD: Tuning Resolver operational status: ready 19700101-00:00:04 CableCARD: Motorola card (0000:0625) 19700101-00:00:04 CableCARD: authentication status: authentication in progress 19700101-00:00:04 CableCARD: authentication status: authentication success, validation needed 19700101-00:00:18 System: network link 100f 19700101-00:00:19 System: ip address obtained: 192.168.11.8 / 255.255.255.0 20140424-16:42:36 CableCARD: time changed from Thu Jan 01 00:00:20 1970 to Thu Apr 24 16:42:36 2014 20140424-16:42:48 CableCARD: Tuner2: vchannel 2030 (663MHz-1) access = not-subscribed 20140424-16:43:02 CableCARD: Tuner2: vchannel 2029 (465MHz-2) access = not-subscribed 20140424-16:43:43 CableCARD: Tuner2: vchannel 2030 (663MHz-1) access = not-subscribed 20140424-16:43:56 CableCARD: card indicated fatal error or firmware upgrade (ccio_detect:214) 20140424-16:43:56 CableCARD: technical error 0 (ccio_detect:215) 20140424-16:43:56 CableCARD: message: A technical problem is preventing you from receiving all the cable services at this time. Please call your cable operator and report error code 161-0 to have this problem resolved. 20140424-16:43:56 CableCARD: M-CARD reset 20140424-16:44:00 CableCARD: Motorola card (0000:0625) 20140424-16:44:00 CableCARD: authentication status: authentication in progress 20140424-16:44:00 CableCARD: authentication status: authentication success, validation needed 20140424-16:46:00 CableCARD: Tuner2: vchannel 2031 (495MHz-2) access = not-subscribed 20140424-16:46:36 CableCARD: Tuner2: vchannel 2029 (465MHz-2) access = not-subscribed 20140424-16:47:39 CableCARD: Tuner2: vchannel 2022 (111MHz-1) access = subscribed 20140424-16:47:39 CableCARD: Tuner2: vchannel 2022 (111MHz-1) access = not-subscribed 20140424-16:47:39 CableCARD: message: /get_cc_url?CableCARD///cp/auth 20140424-16:48:31 CableCARD: Tuner2: vchannel 2009 (789MHz-3) access = subscribed 20140424-16:48:32 CableCARD: Tuner2: vchannel 2009 (789MHz-3) access = not-subscribed 20140424-16:48:32 CableCARD: message: /get_cc_url?CableCARD///cp/auth I explained this to the CS rep but he said there was nothing he could do but send someone out. There appears to be some great technical support available on this forum so I am hoping to trouble shoot and resolve the problem here. I would at least like to narrow it down so I know it is not a problem with something I am doing before sending out a technician. Other relevant(?) status: Status Card Authentication success Card OOB Lock success Card Validation none Tuning Resolver ready System Status Hardware Model HDHR3-CC Firmware Version 20140405beta1 DTCP-IP DTCP 1.7-SD20130219 WMDRM-NDT WMDRM 10-SD20130219 Memory Report 64 MB SDRAM, 2 MB Flash Power Status Active Boot Status Booted Device ID 131B6C59 MAC Address 00:18:DD:31:B6:C5 IP Address 192.168.11.8 Subnet Mask 255.255.255.0 CableCARD ID:000-081-082-920-0 Host ID:064-320-564-313-0 Data:031-480-937-05 UnitAddress:000-00810-82920-175 Card S/N:MA1246ET0400 eCM MAC:Unknown Host MAC:00:18:DD:31:B6:C5 Host Type:One-way CableCARD Status Card Manufacturer Motorola Card Authentication success Card Validation none 3DES encryption supported OOB Frequency 75.250 MHz OOB Lock 2.048 Mbps Signal Strength 100% (2.0 dBmV) Signal Quality 100% (39.4 dB) Channel List tuning-resolver Tuning Resolver Status Authentication success Downstream success Upstream success Operational Status ready User Inactivity 0 minutes Any help would be appreciated!21KViews0likes44Comments
Cable Card restrictions.
Why are non premium channels like USAHD and AMCHD copy protected? I am forced to use Windows Media center on my htpc in order to view them. The restrictions are annoying and really driving me in the direction of downgrading to basic and waiting until the series I watch hit netflix and hulu.Solved2.6KViews0likes1Comment